Open Access Journals gaining more Readers and Citations
700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers
Pollution is the introduction of contaminants into the environment. Pollution is classified as Point source pollution and non-point source pollution. Land pollution, air pollution, noise pollution, water pollution etc. are types of pollution. Air pollution is the introduction of particulates, biological molecules, or other harmful gases into Earth's atmosphere, causing disease, death to humans, environmental damage to other living organisms such as food crops, or the natural or built environment. Air pollution may come from anthropogenic or natural sources.
Thermal pollution prevails because of harmful release of super-heated liquid into water bodies. Environmental toxicology is otherwise called entox. The introduction of waste substances into seas is ocean pollution. A cold blooded vertebrate of a class Amphibia that comprises the frogs, amphibians, newts, lizards, and caecilians are called amphibians. The main component of the natural gas is methane which is colorless, odorless and the simplest alkane having chemical formula CH4. Any pollution that can trace its source from its industrial activities can be referred as Industrial Pollution. Pollution Damage is the term prevails in oil industries. It is the accidental discharge of oil from the ship into the water body.
|Journal of Pollution Effects & Control provides the Quarterly publication of articles in all areas related to Pollution and Environment. Journal of Pollution Effects & Control welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published approximately one month after acceptance.|
|Submit manuscript at https://www.editorialmanager.com/environsci/ or send as an e-mail attachment to the Editorial Office at [email protected] or [email protected]|
|A manuscript number will be e-mailed to the corresponding author within 72 hours. Publication Ethics and Malpractice Statement|
|OMIC'S International Policy Regarding the NIH Mandate|
|OMICS International will support authors by posting the published version of articles by NIH grant-holders to PubMed Central immediately after publication.|
|Editorial Policies and Process|
|The Journal of Pollution Effects & Control follows a progressive Editorial Policy that encourages innovation and analysis to submit the initial research, reviews and editorial observations as articles, well supported by tables and graphic illustration.|
|Note: Its Authors sole responsibility for any scientific misconduct including plagiarism in their research articles. Publisher is not responsible for any scientific misconduct in any published research article. However as a publisher Omics will follow strict scientific guidelines and EIC’s advice to retract or erratum of any article at any time if found scientific misconduct or errors in any articles.|
|Article Processing Charges:|
Journal of Pollution Effects & Control is organized by OMICS International, a self supporting organization and does not receive funding from any institution/government. Hence, the operation of the Journal is solely financed by the handling fees received from authors and some academic/corporate sponsors. The handling fees are required to meet maintenance of the journal. Being an Open Access Journal, Journal of Pollution Effects & Control does not receive payment for subscription, as the articles are freely accessible over the internet. Authors of articles are required to pay a fair handling fee for processing their articles. However, there are no submission charges. Authors are required to make payment only after their manuscript has been accepted for publication.
The basic article processing fee or manuscript handling cost is as per the price mentioned above on the other hand it may vary based on the extensive editing, colored effects, complex equations, extra elongation of no. of pages of the article, etc.
|Submission of an Article|
In order to reduce delays, authors should assure that the level, length and format of a manuscript submission conform to OMICS International requirements at the submission and each revision stage. Submitted articles should have a summary/abstract, separate from the main text, of up to 300 words. This summary does not include references, numbers, abbreviations or measurements unless essential. The summary should provide a basic-level introduction to the field; a brief account of the background and principle of the work; a statement of the main conclusions; and 2-3 sentences that place the main findings into a general context. The text may contain a few short subheadings of no more than 40 characters each.
|With an objective to make scientific and health care information globally available, OMICS Group has launched Translation Services. As per the interest of the scientific community from non-English speaking territories, we have introduced this new feature to facilitate authors to reach a global audience in many major world languages. OMICS Translation Services help the scientific community to have easy access to all scientific articles not only in English but also in French, Spanish, German, Chinese and Japanese.|
|The scientific translations service grants a global presence to the authors and their research. Our language experts in Spanish, French, German, Chinese and Japanese translate articles from English to the desired world languages and vice-versa as per the author’s requirement. As an open access publisher OMICS International does not get any financial contributions from other organizations. Authors who wish to use our translation services and who are interested in publishing their research in the above-mentioned languages are requested to pay the following charges in addition to the article processing charges.|
|For more information please visit the website of our Language Translation Services.|
|Formats for OMICS International Contributions: OMICS International accepts the following: original articles, reviews, abstracts, addendums, announcements, article-commentaries, book reviews, rapid communications, letters to the editor, annual meeting abstracts, conference proceedings, calendars, case-reports, corrections, discussions, meeting-reports, news, obituaries, orations, product reviews, hypotheses and analyses.|
|Also, include current telephone and fax numbers, as well as postal and E-mail address of corresponding author to maintain communication.|
Guidelines for Research Articles
Letters to the Editor/Concise Communications
|Acknowledgement: This section includes acknowledgment of people, grant details, funds, etc.|
|Note: If an author fails to submit his/her work as per the above instructions, they are pleased to maintain clear titles namely headings, subheading.|
|Only published or accepted manuscripts should be included in the reference list. Meetings abstracts, conference talks, or papers that have been submitted but not yet accepted should not be cited. All personal communications should be supported by a letter from the relevant authors.|
|OMICS uses the numbered citation (citation-sequence) method. References are listed and numbered in the order that they appear in the text. In the text, citations should be indicated by the reference number in brackets. Multiple citations within a single set of brackets should be separated by commas. When there are three or more sequential citations, they should be given as a range. Example: "... now enable biologists to simultaneously monitor the expression of thousands of genes in a single experiment [1,5-7,28]". Make sure the parts of the manuscript are in the correct order for the relevant journal before ordering the citations. Figure captions and tables should be at the end of the manuscript.|
|Authors are requested to provide at least one online link for each reference as following (preferably PubMed).|
|Because all references will be linked electronically as much as possible to the papers they cite, proper formatting of the references is crucial. Please use the following style for the reference list:|
Note: Please list the first five authors and then add "et al." if there are additional authors.
Electronic Journal Articles Entrez Programming Utilities
|These should be used at a minimum and designed as simple as possible. We strongly encourage authors to submit tables as .doc format. Tables are to be typed double-spaced throughout, including headings and footnotes. Each table should be on a separate page, numbered consecutively in Arabic numerals and supplied with a heading and a legend. Tables should be self-explanatory without reference to the text. Preferably, the details of the methods used in the experiments should be described in the legend instead of in the text. The same data should not be presented in both table and graph form or repeated in the text. Cells can be copied from an Excel spreadsheet and pasted into a word document, but Excel files should not be embedded as objects.|
|Note: If the submission is in PDF format, the author is requested to retain the same in .doc format in order to aid in completion of process successfully.|
|The preferred file formats for photographic images are .doc, TIFF and JPEG. If you have created images with separate components on different layers, please send us the Photoshop files.|
|All images must be at or above intended display size, with the following image resolutions: Line Art 800 dpi, Combination (Line Art + Halftone) 600 dpi, Halftone 300 dpi. See the Image quality specifications chart for details. Image files also must be cropped as close to the actual image as possible.|
|Use Arabic numerals to designate figures and upper case letters for their parts (Figure 1). Begin each legend with a title and include sufficient description so that the figure is understandable without reading the text of the manuscript. Information given in legends should not be repeated in the text.|
|Figure legends: These should be typed in numerical order on a separate sheet|
|Tables and Equations as Graphics:|
|If equations cannot be encoded in MathML, submit them in TIFF or EPS format as discrete files (i.e., a file containing only the data for one equation). Only when tables cannot be encoded as XML/SGML can they be submitted as graphics. If this method is used, it is critical that the font size in all equations and tables is consistent and legible throughout all submissions.|
|Discrete items of the Supplementary Information (for example, figures, tables) referred to at an appropriate point in the main text of the paper.|
|Summary diagram/figure included as part of the Supplementary Information (optional).|
|All Supplementary Information is supplied as a single PDF file, where possible. File size within the permitted limits for Supplementary Information. Images should be a maximum size of 640 x 480 pixels (9 x 6.8 inches at 72 pixels per inch).|
|Proofs and Reprints:|
|Electronic proofs will be sent as an e-mail attachment to the corresponding author as a PDF file. Page proofs are considered to be the final version of the manuscript. With the exception of typographical or minor clerical errors, no changes will be made in the manuscript at the proof stage. Authors will have free electronic access to the full text (HTML, PDF and XML) of the article. Authors can freely download the PDF file from which they can print unlimited copies of their articles.|
|Submission of a manuscript implies that the work described has not been published before (except in the form of an abstract or as part of a published lecture, or thesis) and that it is not under consideration for publication elsewhere.|
|All works published by OMICS International are under the terms of the Creative Commons Attribution License. This permits anyone to copy, distribute, transmit and adapt the work provided the original work and source is appropriately cited.|