alexa An Approach to Microalgal Production Systems for Commodities | Open Access Journals
ISSN: 2572-3103
Journal of Oceanography and Marine Research
Make the best use of Scientific Research and information from our 700+ peer reviewed, Open Access Journals that operates with the help of 50,000+ Editorial Board Members and esteemed reviewers and 1000+ Scientific associations in Medical, Clinical, Pharmaceutical, Engineering, Technology and Management Fields.
Meet Inspiring Speakers and Experts at our 3000+ Global Conferenceseries Events with over 600+ Conferences, 1200+ Symposiums and 1200+ Workshops on
Medical, Pharma, Engineering, Science, Technology and Business

An Approach to Microalgal Production Systems for Commodities

Renil Anthony and Troy Runge*
Department of Biological Systems Engineering, University of Wisconsin-Madison, Madison, Wisconsin 53706, United States
Corresponding Author : Troy Runge
Department of Biological Systems Engineering
University of Wisconsin-Madison
Madison, Wisconsin 53706, USA
Tel: 608-890-3143
E-mail: [email protected]
Received January 14, 2014; Accepted Februay 12, 2014; Published Februay 14, 20142
Citation: Anthony R, Runge T (2014) An Approach to Microalgal Production Systems for Commodities. Oceanography 2:116. doi: 10.4172/2332-2632.1000116
Copyright: © 2014 Anthony R, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Related article at
DownloadPubmed DownloadScholar Google

Visit for more related articles at Journal of Oceanography and Marine Research

Microalgae have been actively researched in recent years as a feedstock for commodities such as fuels, biosolvents [1], animal feed [2], and bio-based plastics and polymers [3]. Microalgae are a promising biomass feedstock due to a wide range of product possibilities, high growth rates, and low resource demands. Although there are small to mid-size commercial microalgae production systems for high value human nutritional supplements worldwide, large-scale commercialization of microalgal systems for commodities are limited by the low economic returns on the products generated. Continuing research and testing of different production strategies and scenarios represents the best path to achieve technical and economic feasibility of microalgae to bioproducts.
Currently, commercial production of microalgae totals nearly 15,000 t/y with the majority of the material produced for human consumption, and almost all cultivated in outdoor open ponds [2]. Microalgae Spirulina, Chlorella, Dunaliella, and Haematoccocus are few of the commercially produced strains with major production facilities in China, Japan, USA, India, and Australia [2]. High value nutritional and pharmaceutical products such as ω-3 fatty acids, antioxidants, vitamins, and proteins derived from these strains justify the economics of commercial production and processing. Unfortunately, the economic viability of microalgae for lower margin commodities needs to be improved considerably. Since commodity prices are unlikely to rise significantly, the best strategy is to lower algal feedstock production costs by improving cultivation and harvesting practices.
Commercial cultivation of microalgae in outdoor open ponds or raceways is considered to have lower costs and thus more economically attractive than closed system photobioreactors [2]. Such open ponds systems can be built upstream of wastewater treatment plants or beside agricultural facilities. Nutrient growth media requirements in these ponds can be fulfilled using municipal wastewater or agricultural residue [4]. Additionally, waste streams of carbon dioxide from flue gas or fermenters can be utilized as a source of inorganic carbon for enhanced growth [5]. However, a considerable challenge faced by open pond systems is to constantly maintain the desired strain cultures. Such contamination problems can be overcome by carefully selecting microalgae strains that thrive in adverse conditions such as marine algae, thermophilic algae, and algae that can grow in extreme pH conditions and then simulating those conditions to inhibit wild type algae growth.
Facile harvesting of microalgae represents a significant technical challenge and is one of the key processing steps that impact production economics. Simple harvesting methods need to be developed to concentrate microalgae to greater than 3% solids prior to using conventional dewatering methods such as centrifugation or filtration to allow for sufficient equipment throughput to minimize drying costs. Microalgae can be agglomerated by bioflocculation or by pH adjustment of growth media through control of the CO2 supply [6,7]. The use of coagulant or flocculant additives should be avoided as much as possible to support downstream processes and keep processing costs low.
Based on the desired bioproduct from microalgae, decisions should be made regarding drying, pretreatment, and biomass conversion. Drying requirements for products such as animal feed or fertilizer should be met with waste heat sources or solar energy whenever possible, taking advantage of local resources and geographical location of the facility. For other products that require further processing and conversion of the biomass, the goal should be to utilize a biorefinery platform to produce several products by fractionating the algal biomass without drying [8]. To this effect, recent studies employing subcritical co-solvent extraction [9], in situ transesterification [10], acid-base hydrolysis [11], and polymeric membranes [12] have been successful at laboratory scale. To be acceptable as a sustainable feedstock, the economics of low value products from microalgae should be credited with the offset costs of wastewater remediation and CO2 capture, with these credits and processing costs allocated to all the products generated by fractionating microalgae.
Finally, genetic engineering of microalgae is another path towards lower processing costs by achieving superior biochemical composition or in some instances by the direct secretion of products desired [13]. Similarly, heterotrophic and mixotrophic microalgae are also being tested to utilize carbohydrate feedstocks to produce lipid content as high as 60% dry weight [14,15]. Although these systems incorporate carefully controlled closed systems, such as photobioreactors, the experience gained is invaluable in developing commercial-scale microalgal systems.
In summary, microalgae are organisms with high photosynthetic efficiency that can utilize and remediate waste streams and have the potential to generate an array of important commodities. However, this potential can only be unlocked by developing effective low cost production systems. The attainment of sustainable bioenergy from microalgae requires significant R&D to develop simple and efficient processes. Although the establishment of commercial microalgal systems is a complex task, a concerted effort will ensure feedstock sustainability stimulating local and regional development.

Select your language of interest to view the total content in your interested language
Post your comment

Share This Article

Relevant Topics

Article Usage

  • Total views: 11670
  • [From(publication date):
    February-2014 - Jul 24, 2017]
  • Breakdown by view type
  • HTML page views : 7881
  • PDF downloads :3789

Post your comment

captcha   Reload  Can't read the image? click here to refresh

Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version