Selvakumar G*, Panneerselvam P and Ganeshamurthy AN
Indian Institute of Horticultural Research, Hessaraghatta Lake Post, Bangalore -560089, India
Received date: May 31, 2014; Accepted date: June 26, 2014; Published date: June 30, 2014
Citation: Selvakumar G, Panneerselvam P, Ganeshamurthy AN (2014) Biosafety of Novel Bioinoculants. J Biofertil Biopestici 5:145. doi:10.4172/2155-6202.1000145
Copyright: © 2014 Selvakumar G, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Visit for more related articles at Journal of Agricultural Science and Food Research
With rapid advances in microbial discovery and inoculant technology, the realm of microbial inoculants has seen a significant shift from the conventional range of microbes viz., Rhizobium, Azospirillum, Azotobacter, etc. to include a wide range of bacterial and fungal genera that colonize the rhizosphere and promote plant growth in a myriad fashion. Such microbial strains with beneficial traits have been included under the umbrella terminologies of Plant Growth Promoting Rhizobacteria (PGPR) and Plant Growth Promoting Rhizofungi (PGRF). While this is definitely a welcome step, it brings along with it a host of pertinent questions, of which the biosafety of the microbial strains used for inoculant formulation is of paramount importance. This rationalization becomes imperative in the present scenario, where the etiology and pathogenesis of several hitherto unknown or lesser known bacterial species are being deciphered, and opportunistic pathogenic properties are being attributed to several commonly occurring environmental microbes. Another issue that needs to be factored in this paradigm is the possible horizontal gene transfer between naturally occurring microbes and the introduced inoculant strains. This assumes significance since horizontal gene transfer amongst organisms plays a larger role in the context of environmental protection and evolving antibiotic resistance. Hence a judicious analysis of the benefits and risks associated with novel microbial inoculants need to be addressed, before its eventual usage. Therefore it is imperative for microbiologist’s agronomists and plant protection scientists to be aware about the latest trends in biosafety, in order to make informed decisions in their day to day work. Hence this article will primarily focus on the need for ensuring the biosafety of the newer bioinoculants, and the relevant regulatory frameworks that are in place internationally.
The term biosafetycan be broadly described as the measures that need to be taken up for the prevention of large-scale loss of biological integrity, with a primary focus on both ecology and human health. It can also be described as the containment principles, technologies and practices that are implemented to prevent unintentional exposure to pathogens and toxins, or their accidental release in the environment . It is to be noted here that though biosafety primarily focuses on human health, the well-being of the ecosystem and its biological integrity are also of paramount importance. Though biosafety principles and practice have been in place in different countries worldwide, they were internationally rationalized and structured by the Cartagena Protocol on Biosafety to the Convention on Biological Diversity , as a supplement to the Convention on Biological Diversity. This protocol seeks to protect biological diversity from the potential risks posed by genetically modified organisms produced by modern biotechnology. Though the main focus of this protocol were the potential risks arising from the utilization of Living Modified Organisms (LMOs). The Cartagena Protocol on Biosafety makes clear that products from new technologies must be based on the precautionary principle and thereby allows developing nations to balance public health and economic benefits. This “precautionary principle” when applied for risk assessment and containment of potentially harmful organisms, can serve as an excellent guideline for national level risk profiling and hazard alleviation. Individual nations are at liberty to legislate on the restrictions that are to be put in place for ensuring the wellbeing of the population and environment.
Based on the risk profile of individual microbes, each country classifies the microbial agents in that country by risk groups based on pathogenecity of the organism, modes of transmission and host range of the organism. Country wise classification of risk groups may be influenced by existing levels of immunity, density / movement of host population presence of appropriate vectors and standards of environmental hygiene. A guiding principle for this exercise is the classification of infectious agents into risk groups by the World Health Organization (WHO), which proposed a four tier classification of infectious organisms , as described below.
•WHO Risk Group 1 (no or low individual and community risk): A microorganism that is unlikely to cause human disease or animal disease
•WHO Risk Group 2 (moderate individual risk, low community risk): A pathogen that can cause human or animal disease but is unlikely to be a serious hazard to laboratory workers, the community, livestock or the environment. Laboratory exposures may cause serious infection, but effective treatment and preventative measures are available and the risk of spread of infection is limited
•WHO Risk Group 3 (high individual risk, low community risk): A pathogen that usually causes serious human or animal disease but does not ordinarily spread from one infected individual to another. Effective treatment and preventive measures are available
•WHO Risk Group 4 (high individual and community risk): A pathogen that usually causes serious human or animal disease and that can be readily transmitted from one individual to another, directly or indirectly. Effective treatment and preventive measures are not usually available.
Though this system of classification has been recommended by the WHO, primarily for laboratory practice, most countries tend to follow a four tier system for classification of infectious agents. Individual nations are at liberty to assign individual microbes to appropriate risk groups and legislate a suitable legal frame work to alleviate the risks caused by infectious agents. Hence it may be observed that the same microbe may be assigned to different risk groups by different nations depending on the prevailing conditions.
It is quite a common knowledge that the soil and the interior tissues of plants are treasure troves of microbes and harbor quite a number of potential bioinoculant strains. If one were to survey both these environments, it’s quite common to come across strains that have been assigned the opportunistic pathogenic status. But in reality many of these strains may not harbor pathogenic determinants, though the possibility of they acquiring the pathogenic arsenal via horizontal gene transfer cannot be ruled out. In the recent past, number of studies have reported the beneficial traits of microbial strains with possible human health considerations and there is ever increasing body of knowledge on the possible agricultural benefits of such microbes. Table 1, presents a non–exhaustive list of such microbial strains.
|Organism||Source of Isolation/ Crop on which effect was recorded||Effect||Reference|
|Enterobacter aerogenes||Apples||Reported to control P. cactorum infection of apples in nursery soils|||
|Serratia plymuthica||Cotton||Controls Rhizoctoniasolani|||
|Enterobacter cloacae||Cucumbers||Increased the yield of cucumbers|||
|Enterobacter ludwigii||Lolium perenne L.||First report on the PGPR features of E. ludwigii|||
|Enterobacter sp||Coconut rhizosphere||Production of phytohormones, siderophores and antibiotics|||
|Enterobacter sp.||Broccoli||Promoted growth of Brassica oleracea (broccoli)|||
|Serratia plymuthica||Peppers||Biocontrol agent for management of Phytophtoracapsici|||
|Acinetobacter calcoaceticus||Wheat rhizosphere||Improved plant growth in pot and field studies. Has the ability to solubilise P, produce IAA and siderophores|||
|Enterobacter asburiae||Mustard||Possesses the inherent ability to produce growth regulators in the presence of fungicides|||
|Enterobacter arachidis sp. nov||Groundnut||A novel methylotrophic nitrogen-fixing bacterial strain|||
|Escherichia coli||Maize||Significantly enhanced plant growth and nutrient uptake|||
|Stenotrophomonas maltophilia||Hazelnut seedlings||Increased plant growth promotion|||
|Bacillus cereus||Arabidopsis||Induced resistance against a broad spectrum of pathogens including Pseudomonas syringaepv. tomato DC3000|||
|Enterobacter cancerogenus||Pigeon Pea||Growth promotion observed in pigeon pea|||
|Enterobacter sp||Maize||Enhanced nitrogen accumulation and significantly, improved growth of maize seedlings over controls|||
|Enterobacter radicincitans||Wheat||Biological nitrogen-fixing endophytic bacterium with growth-promoting effects on a variety of crops|||
|Pseudomonas aeruginosa||Cowpea||Solubilizes phosphate, produces IAA, siderophore, HCN and ammonia|||
|Aspergillus flavus , Aspergillus fumigatus||Rhizosphere of sugarcane, groundnut and paddy fields||P solubilization and IAA production|||
|Pseudomonas aeruginosa stain NJ-15||Soil isolate||Antagonistic to a wide range of plant pathogenic fungi|||
|Pseudomonas aeruginosa strain 2apa||Tomato||Positive for root colonization, indole acetic acid, salicylic acid , siderophore production and inhibited the growth of wide range of plant pathogenic microorganisms|||
Table 1: A non-exhaustive compilation of the reported instances of plant growth promotion by microbial strains with possible human health concerns
Though it would be unfair to brand any of the above cited environmental microbial strains as pathogenic, solely based on their taxonomic assignment, until and otherwise proven by the principles laid out in the Kochs postulates , or by the detection of potentially pathogenic factors like toxins, under invitro conditions. The above information is meant to give the reader an insight on the crossroads between agricultural utility and biosafety of novel microbial inoculant strains.
Since microbes are known to be omnipresent and omnipotent, it’s not uncommon to find a microbial strain with superior bioefficacy from the most unusual of places, and likewise the description of taxonomically novel strains has seen a quantum shift with the improvements in nucleotide sequencing techniques. A common situation that most soil microbiologists find themselves often, is the presence of excellent plant growth promoting strains belonging to the genera Stenotrophomonas, Acinetobacter, Enterobacter, etc. from the soil environment. Though all strains of the above mentioned may not be pathogenic, the incidence of opportunistic infection by members of these genera is on the rise. Apart from these, several novel species with beneficial traits tend to emerge on the radar of an enterprising soil microbiologist. Though such strains are widely prevalent in the environment, they tend to exist in equilibrium in nature which ensures a natural biosafety net. But when such stains are selected and their population levels are raised to threshold levels to attain the desired effects of inoculation, it may raise public health and ecological concerns. In such a scenario, it’s imperative to define a paradigm for utilization of unconventional strains for bioinoculant production.
A crucial step in this direction is the accurate determination of the taxonomy of the organism, by the polyphasic approach. This could include a combination of phenotypic, chemotaxonomic, and genotypic methods. This crucial step can be followed by the safety evaluation framework provided by the American Biological Safety Association (ABSA). The preliminary risk assessment process can be made based on the risk group level of the microorganisms as referenced in the classification database for infectious agents (http:// www.absa.org/riskgroups/). In order to further assess the biosafety of a novel microbial agent, its toxicity can be determined by acute toxicity tests (usually carried out on small laboratory animals), and its environmental effects on select animal species like fishes, earthworms, pollinators, etc. The acute toxicity procedures followed in most nations include oral toxicity/pathogenicity, pulmonary toxicity/pathogenicity, intravenous toxicity/pathogenicity, dermal toxicity/pathogenicity, eye irritation/infectivity, and reports of hypersensitivity incidents . Thus it can be observed that a combination of acute toxicity tests and environmental evaluation can give a fair estimate of the biohazard potential of a novel microbe. But this system of evaluation that is followed worldwide does not factor the effects of chronic exposure and the possibility of horizontal gene transfer with environmental strains.
India has been a pioneer in enacting biosafety legislations, with special reference to microbial inoculants some of the important legislations that have been enacted are discussed here in brief. The Rules for Manufacture, Use, Import, Export and Storage of Hazardous Microorganisms)/Genetically Engineered Organisms or Cells (1989) under the Environmental Protection Act (1986) is a pioneering legislation. This Act defines the term microorganisms as “Microorganisms shall include all the bacteria, viruses, fungi, mycoplasma, cell lines, algae, protozoans and nematodes indicated in the schedule and those that have not been presently known to exist in the country or not have been discovered so far”. An essential feature of this act is the enlistment of human and animal pathogens viz., fungal agents, parasitic agents, viral, rickettsial and chlamydial agents and special category agents, into risk groups II and III based on their risk profiles. Another interesting feature of this legislation is the creation of a separate section called as “Plant Pests” to accommodate potential plant pathogens. This act stipulates that no person shall import, export, transport, manufacture, process, use or sell any hazardous microorganisms or genetically engineered organisms /substances or cells except with the approval of the Genetic Engineering Approval Committee, which functions under the Ministry of Environment and Forests, Government of India. But with advances in microbial discovery and pathogenesis, this risk classification needs to be periodically updated in order to uphold the highest levels of biosafety while simultaneously harnessing the benefits of novel bacteria for the benefit of mankind.
A second legislation of relevance in India is the Insecticide Act (1968), which has an exhaustive list of microbial biological control agents published under Section 3 of the Insecticide Act, and is amended from time to time by gazette notifications. All microorganisms notified under this Act, these require toxicology testing and mandatory registration with the Central Insecticide Board and Registration Committee, under the Ministry of Agriculture, Government of India, before commercial usage. Apart from these the Recombinant DNA Safety Guidelines (1990) notified by the Department of Biotechnology, Ministry of Science and Technology, Govt. of India, defines the biosafety measures that need to be put in place for the research activities, large scale use and also the environmental impact during field applications of genetically altered material products. These guidelines have assigned microbes based on their modes of transmission, host range of the agent, availability of effective preventive treatments or curative medicines, capability to cause diseases to humans/animals/plants, epidemic causing strains in India. While bacteria and fungi are accommodated into risk groups II and III, viruses have been accommodated into risk groups II, III and IV. By enacting pioneering legislations, India has placed an effective biosafety net and has regulated the use of potentially hazardous microbes, both from the animal and plant pathogenic point of view.
Though most nations tend to follow an animal model based testing for the biosafety evaluation of microbial inoculants, it needs supplementation by an equally rigorous environmental evaluation especially from the point of horizontal gene transfer in order to assess the potential of novel inoculant strains to acquire/donate genes. This is more pertinent for bacterial species with relatives that pose health and biosafety concerns. For novel genera/species to be used as microbial inoculants, the supplementation of acute exposure studies (conducted on small animal models), with chronic exposure studies, in order to determine the long term effects of chronic exposure would be pave the way for their unhindered usage for the benefit of mankind. Another issue that rarely catches the attention of biosafety regulators is the widespread use of a whole gamut of nondescript organic manures and formulations that harbor numerous beneficial and potentially harmful microbes alike. Though bringing them under a biosafety framework would be a Herculean task, some biosafety guidelines need to be evolved in order to reduce the risk perception caused by a possible magnification of potentially harmful microbes contained within these nondescript formulations.
From the academic point of view, the issue of reporting the mere isolation of a particular microbial species, from clinical specimens without establishing the cause – effect relationship between the isolated microbe and disease/symptom incidence needs to be rationalized. This is a pertinent issue, since the mere report of an environmental microbe from the clinical environment does not necessarily render it pathogenic, but tends to send alarm bells across the scientific communities both clinical and non-clinical alike and creates a stigma around the reported microbial species. While a high degree of caution is to be exercised, in the selection of microbial inoculant strains, it also has to be ensured that potentially beneficial strains are not left behind due to the lack of rational evaluation procedures.
In microbial inoculant technology, it is imperative that the fruits of modern science reach the target clientele in order to enhance food production; a critical balance has to be maintained while viewing benefits derived from these technologies viz a viz the probable risks posed by the novel technologies and microbial strains used for inoculant formulation. In such a scenario the biosafety of novel microbial strains, is of paramount importance and suitable regulatory frameworks have to be put in place to in order to ensure that benefits and risks associated with such novel strains are properly balanced and do not pose a challenge to the health of higher forms of life and the environment. Such a regulatory process has to be dynamic and has to keep pace with the rapid progress in scientific discoveries, in order to ensure the larger objective of enhancing food production with reduced chemical input usage.
The views expressed herein are those of the authors only. It may not necessarily be the views of the institution/organization the authors are associated with.