Total Productive Maintenance (TPM) Practices Adopted at Manufacturing Unit: An Analysis
Received Date: Jul 19, 2017 / Accepted Date: Sep 07, 2017 / Published Date: Sep 15, 2017
Total Productive Maintenance is a maintenance program which involves a newly defined concept for maintaining plants and equipment. TPM program allows manufacturing units to look for evolutionary changes happened in business environment. TPM is an evolving technique which is followed in the all organization. This helps improve key business process which helps firms to identify key performance indicators. The objectives of the study is to examine the advanced methodologies that can be implemented to bring betterment of the process being used and to compute overall equipment effectiveness (OEE) to analyze maintenance performance of machine and to understand the quality standards and customer expectations over the products manufactured. The Research design taken for this study is Analytical research. The secondary data are collected from annual company records for the month July 16 to Dec 16. The various tools used for analysing the data for this research paper is Pareto chart, Histogram, Why- Why analysis, Fish bone diagram, Pie chart. The findings of this research is OEE (Overall Equipment Effectiveness) has increased due to proper utilization of machine; In-process scrap gets reduced due to development of gauges for measuring the dimension near the machining area and inspection area near the machining center. The suggestion given to the management from this research is Cleaning and Inspection time and machine setting change over time to be reduced to utilize the machine as much as possible to meet the production target and to increase the OEE.
Keywords: OEE; Machine loss; Maintenance; Quality defects
With advancements in technology all manufacturing firms moving towards automation centralizing their plants for survival by maximizing productivity levels by reframing their all legacy applications. The concepts of Total Productive Maintenance (TPM) helping firms to maximize the equipment effectiveness till the expiry of the equipment. Maintaining equipment throughout its lifetime requires larger amount of time effort. TPM helps organizations in maintaining equipment to protect from quality defects, speed losses and also prevent unexpected breakdown because of accidental and incidental losses. This study executing ways by identifying new methodologies like cost reduction, promoting employees to face newer challenges and also transform new culture at work place. Through TPM practices manufacturing organizations ultimate goals transformed themselves towards zero defects, zero break downs and zero accidents all the time.
Nakajima suggests the ultimate goal of TPM is to minimize wastage of man hours, raw material, power, tools etc. The concept of overall equipment effectiveness (OEE) allows firms to realize an opportunity for zero defects, zero machine stoppage, zero pollution etc. All manufacturing firms adopts different strategies to make cross functional teams to root cause the barriers in machine uptime, rigorous maintenance programs, equipment maintenance training to all levels (strategic to operational) which allows teams to lower the cost and higher reliability. TPM practices keeping equipment to operate on full capacity with better efficiency and responsiveness.
According to Kennedy  Total Productive Maintenance (TPM) allows manufacturing plants to look for revolution on their existing methodological practices. It allows firms to maximize overall plant and machine efficiency. Since it adopts Japanese lean production approach making firms a complete sense of ownership for plant and equipment operation, promote continuous improvement through team based approach in all functional areas. It improves human capital management by continuously addressing them in elimination/ minimization of machine losses.
Most of the production and their total production cost (30-50%) are currently undertaken within the factory. Due to this business profitability greatly affected because of quality of maintenance. It is important for the firm to improve the maintenance cost since its entirely affected the operating budget of many manufacturing firms. The firms continuously improve the maintenance functions by improving availability of product all the time, their quality and also improving their safety standards and requirements.
Sun et al.  quotes every business organizations applied TPM approach either directly or indirectly to improve their efficiency and effectiveness in their manufacturing approaches.
Kalbande and Thampi  quotes TPM is an important activity for a business in term of maintenance factor. It was not regarded as a nonprofitable activity. However, it does can be more profitable in the long term. Many number of researchers and contributors drafted definitions mainly on autonomous, planned, quality and education and training maintenance.
Need for the Study
TPM is an evolving technique, which is followed in the all organization. This helps to increase the productivity of an organization. Currently, TPM has been implemented in manufacturing unit which has good impact in all aspects. This study is based on TPM impact after Implementation in the manufacturing company. There is a benefit in terms of productivity, reduction of scrap material, oil cost reduction, material utilization. So this study helps us to understand how TPM is beneficial to the organization of TPM after implementation. After detailed study findings and suggestions will be given to management in order to improve the TPM methodologies in the organization.
• To examine the advanced methodologies that can be implemented to bring betterment of the process being used.
• To compute overall equipment effectiveness (OEE) to analyse maintenance performance of machine.
• To understand the quality standards and customer expectations over the products manufactured.
• To lubricate machines involve in smaller scale maintenance before and after closing them.
• To improve the skills of the employees by providing training to them.
• To satisfy the customer’s needs by providing best-of-breed products with quality.
Ahmed et al.  contributed his research work by implementing total productive maintenance (TPM) in pharma sector. The study focused by identifying major losses and their factors which contributes productivity losses. The study suggested planned maintenance program to be implemented which helps pharma sectors to have smooth and increased efficiency on manufacturing load time, cycle time, and reduction in defects while producing units.
According to Katkamwar et al.  study performed how Total Productive Maintenance approach undertaken in spinning industry. The study suggested ways in implementing TPM effectiveness of the equipment. The study initially implemented TPM practices on model machine where the author derived direct and indirect benefits by applying quality tools. The methodological results obtained from this study showing ways to improve effectiveness of machines based on availability and performance.
Goyal and Jindal  identified overall equipment effectiveness (OEE) has important parameter for success in implementing TPM within firm. The study evaluates areas like reduction of manufacturing cycle time, customer complaints, handling autonomous groups on their skills and confidence levels and derived recommendations and conclusions to improves equipment efficiency and effectiveness.
Wudhikarn  proposed a new framework Analytic Network Process (ANP) along with OEE for improving the existing OEE measures and adapted measurement. ANP allows accurate judgment on decision maker even though OEE still a balanced tool to rectify unconformities to undertake appropriate decisions in handling and managing equipment.
Singh and Bhatia  discussed current TPM solutions and methodological practices avail world class manufacturing by overall effectiveness of equipment through team of people not by technology and standalone systems. The success of TPM implementation depends on the attributes like human interaction, effective matrix organizational structures and also through continuous TPM programs.
Singh et al.  implemented TPM practices on CNC machines by incorporating pillars of TPM through phased approach methods to eliminate losses for proper utilization of CNC machines. The author investigated TPM practices on CNC machines with different capacities by analyzing their overall equipment losses to identify effectiveness and efficiency.
Wakjira and Singh  identified correlations between various attributes of TPM to improve manufacturing efficiency by applying overall equipment effectiveness (OEE) in boiler plant in Ethiopia. Major success factors of TPM identified in this study to improve performance enhancements.
In the above literature papers, the authors clearly highlighted the importance of TPM methodologies to be followed in the organization . The literature authors listed above focused implementation of TPM and focused on ways to improve performance efficiency and effectiveness. And also they addressed the issue faced during the implementation of TPM in the organization. They have calculated the various losses which affects directly the productivity of an organization. They also suggested how to improve the Overall Equipment effectiveness by eliminating the various losses. However, they didn’t discussed how the productivity has increased after implementing the TPM in the organization. This article focused on ways how TPM contributes towards the increase in productivity after implementation within an organization. And also how material scrap percentage is got reduced gradually after implementation of TPM is to be studied in the paper .
The research design adopted is analytical research where the researcher has used already available facts or information, and analyzes them to make a critical evaluation of the subject. The study concerns with cause–effect relationships among various variables by analyzing situation to make critical evaluation.
Parameters considered for this study is restricted to In-Process scrap, cleaning and Inspection, Customer complaint, Training, Oil and Spare cost reduction, Break down occurrence.
Secondary data are used for this study. Data collected from part of Research papers and Journals and from company records related to TPM methodologies.
Tools used for data analysis and interpretation
• Pareto chart
• Cause and Effect Diagram
• Why-Why Analysis
Data collection Period: July 2016 to December 2016 from Annual report of the firm.
Data Analysis and Interpretation
During the month of July’16 cleaning and Inspection time was found to be 30 min for a single machine. During the consecutive month the cleaning and inspection time gets reduced from 30 min to 10.4 min due to regular maintenance done (Table 1 and Figure 1).
|Months||Time in min|
Table 1: Cleaning and inspection.
During the month of July 16 Customer complaint found to be 19 mainly due to part mix-up. During the consecutive month the customer complaint has got reduced from 19 to 5 as on date (Table 2 and Figure 2).
|Months||No of complaints|
Table 2: Customer complaint.
Over all equipment efficiency calculation
Equipment Name: XYZ
Date: 1st 2016
Total losses: Setting time loss=30 min in 1st hour
First off time=15 min in 1st hour
Tool change time=20 min in 1st hour
Material not received from store=60min in 5th hour
Total loss=120 min.
OEE found to be 35.5%. But it has gradually increased to 80.53% due to proper utilization of machine without any losses (Figures 3 and 4).
During the month of July 16 Oil cost found to be 2.5 lakhs. During the consecutive month the oil cost has got reduced from 2.5 lakhs to 1.64 lakhs due to proper filtration and by arresting leakages. Simultaneously, spare cost has got reduced from 1.21 lakhs to 0.47 lakhs due to proper maintenance and parts localization (Tables 3 and 4; Figure 5).
|Compressor housing side bolt found loosen||Torque not applied on bolt||Nut runner position error||Malfunction of logic control in PLC program||Bug in PLC program|
Table 3: Occurrence table.
|Compressor housing side bolt found loosen||Torque not applied on bolt||Not verified by operator||Manual error|
Table 4: Non detection table.
It is found that, during the month of July 16 in-process scrap found to be 10.3% mainly occurred in bearing housing because of machining scrap. During the consecutive month the scrap value has got reduced from 10.3% to 1.9% as on date because of Implementation of gauge measuring instrument, part inspection near to the machining area (Tables 5-7 and Figure 6).
|Oil cost reduction|
Table 5: Oil cost reduction.
|Spares cost reduction|
Table 6: Spares cost reduction.
|In process scrap|
Table 7: In process scrap.
The present TPM Methodologies followed in the organization is thoroughly assessed with the available data. Based on the research findings it is concluded that major improvements reflected especially on productivity and outcomes of results. Further there are some suggestions given to the management to utilize the machine time as much as possible to increase the production number by doing the regular maintenance at scheduled period of time. And also few suggestions are given to reduce oil cost and in-process scrap cost.
Recommendation from the Study
• Cleaning and Inspection time to be reduced to utilize the machine as much as possible to meet the production target.
• Setting change over time to be reduced in future, so that OEE can be increased.
• Proper filtration and checking for the leakage at various joints to be done for oil in order to reduce the cost.
• Part localization instead of Importing to be planned to reduce the spare part cost.
• Electrical and Electronics items, and various mechanical systems in a machine to be serviced at scheduled period in order to avoid the machine breakdown.
• Part to be supplied from the before station or store to be on time to avoid the productivity.
• TPM training to be given maximum to all shop floor employees in order to have zero breakdowns and zero accident.
• Implementation of gauges and Measuring instruments to be done in all shop floor area in order to reduce the material scrap.
Direction for Future Research
TPM is evolving technology which is necessary for all the organization to meet the productivity with zero breakdown and zero accident. So in this research paper, the researcher has clearly highlighted how the OEE has contributing in increase in production. So a TPM methodology is the method which can be implemented in all the organization. So a further research, the researchers can this paper as a base research model to move forward in doing his research activity in TPM.
- Kennedy R(1995) Plant and Equipment Effectiveness. Maintenance Journal.
- Sun H, Yam R,Wai-Keung N (2003) “Implementation and evaluation of Total Productive Maintenance (TPM)-A case study in a Hong Kong manufacturing company”. The International Journal of Advanced Manufacturing Technology 22: 224-228.
- Kalbande SV,Thampi GT (2010) “Total Productive Maintenance A case study in manufacturing industry”.Industrial Engineering Journal 2.
- Ahmed T, Ali SM, Allama MM, Parvez MS (2010) “A Total Productive Maintenance (TPM) Approach to Improve Production Efficiency and Development of Loss Structure in a Pharmaceutical Industry”. Global Journal of Management of Business Research 10: 186-190.
- Katkamwar SG, Wadatkar SK, Paropate RV (2013) “Study of Total Productive Maintenance and Its Implementing Approach in Spinning Industries”. International Journal of Engineering Trends and Technology4: 1750-1754.
- Goyal R, Jindal S (2015) “A Systematic Approach towards Implementation of TPM in an Automobile Industry”. International Journal of Emerging Research in Management and Technology 4: 14-17.
- Wudhikarn R (2013) “A Framework for Integrating Overall Equipment Effectiveness with Analytic Network Process Method”. International Journal of Innovation, Management and Technology 4: 351-355.
- Singh N, Bhatia OS (2013) “Review Paper On: Total Productive Maintenance”. International Journal of Advance Research, Ideas and Innovations in Technology 1: 1-9
- Singh R, Gohil AM, Shah DB (2013) “Total Productive Maintenance (TPM) Implementation in a Machine Shop”. Nirma University International Conference on Engineering 51: 592-599.
- Wakjira MW, Singh AP (2012) “Total Productive Maintenance: A Case Study in Manufacturing Industry”. Global Journal of Research in Engineering 12: 26-32.
- Ichikawa A, Takagi K, Takebe Y, Yamazaki K, Izumi T, et al., (1996) “TPM for Every Operator” Portland Productivity Press, Maintenance Engineering 1: 3-16.
- Hartmann EH (1992) “Successfully Installing Total Productive Maintenance in a non-Japanese plant” Total Productive Maintenance, TPM Press Inc. London.
Citation: Venkateswaran N (2017) Total Productive Maintenance (TPM) Practices Adopted at Manufacturing Unit: An Analysis. Arabian J Bus Manag Review 7: 313.
Copyright: © 2017 Venkateswaran N. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Select your language of interest to view the total content in your interested language
Share This Article
- Total views: 1761
- [From(publication date): 0-2017 - Jul 23, 2018]
- Breakdown by view type
- HTML page views: 1574
- PDF downloads: 187