Comparison Mechanical Properties for Fabric (Woven and Knitted)Supported by Composite MaterialKarnoub A2*, Makhlouf S2, Kadi N2and Azari Z1
- *Corresponding Author:
- Karnoub A
Faculty of Mechanical Engineering
University of Aleppo, Syria
E-mail: [email protected]
Received Date: May 30, 2015; Accepted Date: June 15, 2015; Published Date: July 15, 2015
Citation: Karnoub A, Makhlouf S, Kadi N, Azari Z (2015) Comparison Mechanical Properties for Fabric (Woven and Knitted) Supported by Composite Material. J Textile Sci Eng 5:206. doi: 10.4172/2165-8064.1000206
Copyright: ©2015 Karnoub A, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
In many recent years the use of composite materials increases in many fields, for example agricultural uses, where these materials are characterized by good mechanical properties, tenacity and light weight. In this paper, we will shed light on the use of composite materials reinforced by knitted fabric compared with composite materials reinforced by woven fabric. Attachment materials was used in our research is resin, while supported cloth either woven or knitted were manufactured from amplified polypropylene filaments (BCF), and the testing are (tensile strength, resistance to bending, shear strength, resistance to penetration). Comparing the results of composite material produced from knitted fabric shown better mechanical properties than woven fabric because of the knitted fabric distinct by the process of overlap between the stitches that gave better resistance.