Corrosion of Reinforced Steel in Concrete and Its Control: An overviewMA Quraishi1*, DK Nayak2, R Kumar2 and V Kumar2
- *Corresponding Author:
- MA Quraishi
Department of Applied Chemistry
Indian Institute of Technology
Banaras Hindu University
Tel: 0542 236 8558
E-mail: [email protected]
Received Date: December 27, 2016; Accepted Date: February 07, 2017; Published Date: February 12, 2017
Citation: Quraishi MA, Nayak DK, Kumar R, Kumar V (2017) Corrosion of Reinforced Steel in Concrete and Its Control: An overview. J Steel Struct Constr 2:124. doi: 10.4172/2472-0437.1000124
Copyright: © 2017 Quraishi MA et al.. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Reinforced concrete structures show a very good durability as it is capable of withstanding the different kind of environmental exposure. However, the main limitation of concrete, even of good quality, is that the penetration of chlorides, carbon dioxide (CO2 ), moisture, etc., can cause the corrosion of reinforcement bars (rebars). Corrosion of structure can be reduced by proper monitoring and taking suitable control measures at the proper time interval. Detailed review of corrosion of reinforced steel in concrete and its control has been studied and are presented in this paper.