GET THE APP

..

Journal of Material Sciences & Engineering

ISSN: 2169-0022

Open Access

Design and Manufacture of Optimized Continuous Composite Fiber Filament Using Additive Manufacturing Systems

Abstract

Luca De Vivo Nicoloso

The main purpose of this study is to investigate the current state of Additive Manufacturing of Fiber Reinforced Plastics technology. Recent advances in additive manufacturing, with the introduction of fused deposition modeling of continuous fiber-reinforced thermoplastics, have opened a door for further improvements in composite manufacturing. We explore in detail the different available methods of manufacturing structures with continuous fiber reinforced plastics using additive manufacturing. It was found that it's possible to print different types of fibers; Glass, Carbon, Kevlar and Yute (Bio Filaments), and there are two types of resins that are mainly used; thermosets and thermoplastics. Finally, we conclude by analyzing current challenges of this technology in the area of design and structural optimization.

PDF

Share this article

Google Scholar citation report
Citations: 3677

Journal of Material Sciences & Engineering received 3677 citations as per Google Scholar report

Journal of Material Sciences & Engineering peer review process verified at publons

Indexed In

 
arrow_upward arrow_upward