alexa Design and Setup the Sampling System to Modify and Redu
ISSN: 2157-7544

Journal of Thermodynamics & Catalysis
Open Access

Like us on:
OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Research Article

Design and Setup the Sampling System to Modify and Reduce the Deposition in Sampling Fluid Pipe Lines by Reducing the Pressure Drop

Omid Rowshanaie1*, Saari Bin Mustapha2, Hooman Rowshanaie3 and Seyedeh Media Jadbaba4
1Department of Chemical Engineering, University Putra Malaysia, Serdang, Malaysia
2Department of Chemical and Environmental Engineering, University Putra Malaysia, Serdang, Malaysia
3Ph.D. candidate, University Putra Malaysia, Serdang, Malaysia
4Department of Chemical Engineering, Islamic Azad University, Science and Research, Sirjan Branch, Iran
Corresponding Author : Omid Rowshanaie
Department of Chemical Engineering
University Putra, Malaysia
Tel: +60 3-8946 600
E-mail: [email protected]
Received May 27, 2014; Accepted July 14, 2014; Published July 22, 2014
Citation: Rowshanaie O, Mustapha SB, Rowshanaie H, Jadbaba SM (2014) Design and Setup the Sampling System to Modify and Reduce the Deposition in Sampling Fluid Pipe Lines by Reducing the Pressure Drop. J Thermodyn Catal 5:131. doi:10.4172/2157-7544.1000131
Copyright: © 2014 Rowshanaie O, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Related article at
DownloadPubmed DownloadScholar Google


Corrosion and deposition in Refineries and Petrochemicals is becoming one of the most critical and serious obstacle, and also can cause reduce the efficiency, performance, and analysis accurate of industrial instrument such as turbines, power plants, boilers, and especially sampling tube lines, because of increasing the pressure drop due to build-up deposits. To limit and minimize these deposits in sampling pipe lines would be uses a specially sampling system that design and discuss in this article. This kind of sampling system includes: isokinetic sampling, rapid condensation and cooling, pressure reduction, and process indicators, as well as safety devices to protect online instruments and plant personnel. All in all, by increasing the outer and inner diameter of sampling tube lines, wall thickness, Reynolds number, and required sampling rate, the pressure drop of flowing sample is decreasing and also with increasing the volume annual, the amount of deposits are significantly reduce, because of decreasing the pressure drop.


Share This Page

Additional Info

Loading Please wait..
Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version