alexa Determination of Temperature Distribution for Porous Fi
ISSN: 2168-9873

Journal of Applied Mechanical Engineering
Open Access

OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Research Article

Determination of Temperature Distribution for Porous Fin with Temperature-Dependent Heat Generation by Homotopy Analysis Method

Hoshyar HA1,2*, Ganji DD2 and Abbasi M2
1Department of Mechanical Engineering, Bbabol Branch, Emam Sadegh University, Babol, Iran
2Department of Mechanical Engineering, Sari Branch, Islamic Azad University, Sari, Iran
Corresponding Author : Hoshyar HA
Department of Mechanical Engineering
Sari Branch, Islamic Azad University Sari, Iran
Tel: +98 21 4460 0070
E-mail: [email protected]
Received January 20, 2015; Accepted January 27, 2015; Published February 07, 2015
Citation: Hoshyar HA, Ganji DD, Abbasi M (2015) Determination of Temperature Distribution for Porous Fin with Temperature-Dependent Heat Generation by Homotopy Analysis Method. J Appl Mech Eng 4:153. doi:10.4172/2168-9873.1000153
Copyright: © 2015 Hoshyar HA, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.


In this study, highly accurate analytical methods, Homotopy Analysis Method (HAM), is applied for predicting the temperature distribution in a porous fin with temperature dependent internal heat generation. The heat transfer through porous media is simulated using passage velocity from the Darcy’s model. It has been attempted to show the capabilities and wide-range applications of the Homotopy Analysis Method in comparison with a type of numerical analysis as Boundary Value Problem (BVP) in solving this problem. The results show that the HAM is an attractive method in solving this problem.


Share This Page

Additional Info

Loading Please wait..
Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version