Method of Elimination of the Residual Lumination of the Luminescent Covering of ScreenMarina B*, Narkiza B, Borodina K and Sorokina S
Department of Physics and General Technical Disciplines, Institute of Technical Systems and Information Technologies of Yugra State University, Russian Federation
- *Corresponding Author:
- Marina B
Department of Physics and General Technical Disciplines
Institute of Technical Systems and Information Technologies of Yugra State University
Khanty-Mansiysk, Chekhov Street, 16, 628012 Russian Federation
Tel: 08- (3467) -357-797
E-mail: [email protected]
Received date: June 02, 2017; Accepted date: June 21, 2017; Published date: June 30, 2017
Citation: Marina B, Narkiza B, Borodina K, Sorokina S (2017) Method of Elimination of the Residual Lumination of the Luminescent Covering of Screen. J Laser Opt Photonics 4: 159. doi: 10.4172/2469-410X.1000159
Copyright: © 2017 Marina B, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
In the laboratory of physics and general technical disciplines of the Ugra State University, an optoelectronic measuring system based on a high-speed Video Sprint video camera is used for research. The calibration of ECO has revealed a number of nonlinear effects. In the paper, a method is described that allows eliminating the afterglow of the screen of the image converter. The method is based on revealing the law of attenuation of the afterglow of a phosphor. As a result of the application, data loss is reduced, the signal-to-noise ratio is increased.