Microstructure Evolution and Mangnetique Proprieties of Nanocrystalline Fe60 Cu30Al10 Prepared by Combustion ProcessesHafs A1*, Benaldijia A2 and Aitbara A1
- *Corresponding Author:
- Hafs A
University of El Tarf, B.P. 73
El Tarf, 36000, Algeria
E-mail: [email protected]
Received Date: January 05, 2016; Accepted Date: January 23, 2016; Published Date: February 02, 2016
Citation: Hafs A, Benaldijia A, Aitbara A (2016) Microstructure Evolution and Mangnetique Proprieties of Nanocrystalline Fe60 Cu30Al10 Prepared by Combustion Processes. J Material Sci Eng 5: 229. doi:10.4172/2169-0022.1000229
Copyright: © 2016 Hafs A, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Nanostructured disordered iron-aluminium-copper alloy of Fe-30% Al-10% Cu composition was prepared by Self-propagating high-temperature synthesis (SHS) and thermel explosin (TE) techniques of mechanically activated mixture of Fe, Al, Cu powders. The transformations occurring in the material during combustion were studied with the use of X-ray diffraction. Auger spectroscopy and atomic emission spectroscopy (AES) was used to determine the phase composition of the phase formation. Finally, the Magnetic properties were also investigated, for combution processers the magnetic behavior slightly softened becoming a semi hard ferromagnetic.