Modeling and Control of a Wind System Based Doubly Fed Induction Generator: Optimization of the Power Produced
Department of Electrical Engineering, Electronic Power and Control Laboratory, Mohammedia School of Engineering Université Mohammed V-Agdal, Morocco
- *Corresponding Author:
- Marouan Elazzaoui
Department of Electrical Engineering
Electronic Power and Control Laboratory
Mohammedia School of Engineering Université Mohammed V-Agdal, Morocco
E-mail: [email protected]
Received Date: January 15, 2015 Accepted Date: March 03, 2015 Published Date: April 04, 2015
Citation: Elazzaoui M (2015) Modeling and Control of a Wind System Based Doubly Fed Induction Generator: Optimization of the Power Produced. J Electr Electron Syst 4:141. doi:10.4172/2332-0796.1000141
Copyright: © 2015 Elazzaoui M. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
This paper deals with the modeling and control of a wind energy system based on a doubly-fed induction generator. Initially, an MPPT control strategy of the doubly-fed induction generator is presented. Thereafter, the control vectororiented stator flux is performed. Finally, the simulation results of the wind system using a doubly-fed of 3 MW are presented in the Matlab / Simulink environment.