Optimizing Effects of Cots Shore Hardness on Cotton Yarn Properties at Ring FrameBagwan AS1*, Policepatil R2 and Pawar S1
- *Corresponding Author:
- Abdul salam Bagwan
Centre For Textile Functions
Mukesh Patel School Of Technology
Management and Engineering, Shirpur
District – Dhule, India
E-mail: [email protected]
Received Date: October 28, 2015; Accepted Date: February 08, 2016; Published Date: February 10, 2016
Citation: Bagwan AS, Policepatil R, Pawar S (2016) Optimizing Effects of Cots Shore Hardness on Cotton Yarn Properties at Ring Frame. J Textile Sci Eng 6:238. doi:10.4172/2165-8064.1000238
Copyright: © 2016 Bagwan AS, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
The effect of eight different spinning front and back line cots (Synthetic rubber cot) varying only in shore A hardness (65°,83°) on 100% cotton 30’s ring spun yarn has been investigated. The change in cotton yarn properties like mass uniformity, unevenness percent, Imperfection levels (in all class) with progressive change in shore A hardness has also been reported. The count and process parameter’s from opening and cleaning machines that covers blow room and carding then breaker and finisher drawing, speed frame and up to ring spinning kept identical. As one progress from lesser shore hardness (65°) to higher shore hardness (83°) the yarn unevenness percent and imperfection levels gradually increases.