Spanish 
Chinese 
Russian 
German 
French 
Japanese 
Portuguese 
Hindi Research Article
Chitosan A Low Cost Adsorbent for Electroplating Waste Water Treatment
| Bhavani K1, Roshan Ara Begum E1, Selvakumar S2 and Shenbagarathai R1* | |
| 1PG and Research Department of Zoology and Biotechnology, Lady Doak College, Madurai-625 002, Tamil Nadu, India | |
| 2Department of Environmental Studies, School of Energy Environment and Natural Resources, Madurai Kamaraj University, Madurai-625 021, Tamil Nadu, India | |
| Corresponding Author : | Shenbagarathai R PG and Research Department of Zoology and Biotechnology Lady Doak College, Madurai-625 002, Tamil Nadu, India Tel: 0452-2535575 Fax: 0452-2535575 E-mail: shenbagarathai@rediff.com |
| Received February 25, 2016; Accepted April 12, 2016; Published April 18, 2016 | |
| Citation: Bhavani K, Roshan Ara Begum E, Selvakumar S, Shenbagarathai R (2016) Chitosan– A Low Cost Adsorbent for Electroplating Waste Water Treatment. J Bioremed Biodeg 7:346. doi:10.4172/2155-6199.1000346 | |
| Copyright: © 2016 Bhavani K, et al. This is an open-a ccess article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. | |
Abstract
In the wake of rapid industrialization, urbanization and population explosion, the basic needs of life viz. air, water and land are continuously being polluted over the period of the time. Effluent waste from Electroplating industries considerably pollutes the environment. It is of major concern as the discharged heavy metals such as Cr6+, Zn2+, Cu2+, Pb2+, Cd2+ etc. are harmful to the ecosystem. Although various techniques are used for the removal of heavy metals. Bioadsorption process is one of the mainly adopted methods to recycle and reuses the wastewater. Hence the present study focused in assessing the usage of chitosan, a marine biopolymer extracted from the locally available shells of crab Portunus pelagicus as an adsorbent. The ability of chitosan to adsorb heavy metals such as Cr6+, Zn2+, Cu2+, Pb2+, Cd2+ from the electroplating industry waste water effluents was investigated at different pH. It was found that maximum adsorption of heavy metals occurred at a pH range between 5 to 7. The study results indicate that the cost incurred towards extraction was less than that the cost incurred by the commercial treatment facilities. The -OH and –NH2 functional groups in chitosan facilitate the adsorbent function and make it an ideal adsorbent for the treatment of wastewater. This study brings to light that chitosan is function as an economically useful adsorbent for the treatment of electro plating effluent containing heavy metals.
