GET THE APP

..

Bioceramics Development and Applications

ISSN: 2090-5025

Open Access

Processing and Characterization of Silicon Nitride Bioceramics

Abstract

Bryan J. McEntire, Ramaswamy Lakshminarayanan, Prabhakar Thirugnanasambandam, Jacob Seitz-Sampson, Ryan Bock, David O’Brien

As a relatively new biomaterial, silicon nitride (Si3N4) is currently used as an arthrodesis device in the cervical and thoracolumbar spine, and it is under consideration as a bearing material in total joint arthroplasty. In this paper, the development and validation of the manufacturing processes used in the production of Si3N4 biomedical implants are presented and discussed. Manufacturing was conducted in a facility specifically dedicated for this purpose using processes designed to yield net shape intervertebral spinal spacers by conventional dry-pressing, CNC machining of components in the green state, sintering, and hot isostatic pressing. These manufacturing methods were industrialized using Taguchi fractional factorial experimental designs, followed by implementation of statistical process controls. The roles of various processing parameters including raw materials, pressing, and firing conditions (i.e., time, temperature, and pressure) are elucidated. For these devices, it was demonstrated that acceptable physical, mechanical, and dimensional properties were consistently obtained from carefully designed and statistically controlled processes.

PDF

Share this article

Google Scholar citation report
Citations: 1050

Bioceramics Development and Applications received 1050 citations as per Google Scholar report

Indexed In

 
arrow_upward arrow_upward