Radiation Beam Configuring by EBGS as Reflecting Planes
|Doondi kumar Janapala1, R. Swathi2, T. Mahalakshmi3, K. Sandhya4, A. Sarath5
|Related article at Pubmed, Scholar Google|
The variation in via and gap between metal sheets the electronic steer-ability is obtained by introducing the diodes between the metal patches of EBGS in the earlier stages. Here in this paper the beam configuring of the antenna by placement of EBGS as reflecting surfaces instead of the plane metal sheets around the antenna is analyzed and the beam configuration for different placements including backend of the antenna, back-right ends, back-left ends and all ends leaving front end as open is analyzed and results are illustrated in this paper. For the four proposed models return loss, radiation pattern, Gain in 3D and gain in top view are compared and presented along with some other antenna parameters.