RBS Analysis of Zinc Telluride Thin Films by Electron Beam Evaporation TechniqueJayachandran M1*, Ponsurya P2, Abbas ShahulHameed BH3 and Ayeshamariam A4
- *Corresponding Author:
- Jayachandra M
Department of Physics
Sethu Institute of Technology
Pulloor, Kariapatti, 626 115, India
Fax: +91 4565-227713
E-mail: [email protected]
Received Date: March 25, 2017; Accepted Date: June 09, 2017; Published Date: June 15, 2017
Citation: Jayachandran M, Ponsurya P, Abbas ShahulHameed BH, Ayeshamariam A (2017) RBS Analysis of Zinc Telluride Thin Films by Electron Beam Evaporation Technique. Fluid Mech Open Acc 4: 158. doi: 10.4172/2476-2296.1000158
Copyright: © 2017 Jayachandran M. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
To fully characterize the structure of these alloys it is necessary to augment crystallography with local structural measurements. Here Tellurium dioxide is doped with Zinc acetate dihydrate with Glycene to synthesis the powdered particles of ZnTe by simple chemical synthesis, Zinc acetate dihydrate is taking as the ratio of 90% and Tellurium dioxide as 10% this synthesized powdered particles were pelletized to evaporate on the glass plate by using Electron beam evaporation technique. So many researchers reported this technique for the same materials but RBS scattering is the one of the different analyzing technique for this materials. It has been observed that the energy in MeV of the element is well in agreement with Zinc and Telluride which is present in the preparation.