The Energy Effective Method of Modeling and Manufacturing of New Profile Teeth of SawMamatovich AZ*
Professor in Mechanical Engineering Department, Namangan Institute of Engineering and Technology, Kasansayskaya 7, Namangan, Uzbekistan
- *Corresponding Author:
- Mamatovich AZ
Professor in Mechanical Engineering Department
Namangan Institute of Engineering and Technology
Kasansayskaya 7, Namangan, Uzbekistan
E-mail: [email protected]
Received date: January 20, 2017; Accepted date: February 20, 2017; Published date: February 27, 2017
Citation: Mamatovich AZ (2017) The Energy Effective Method of Modeling and Manufacturing of New Profile Teeth of Saw. J Textile Sci Eng 6:282. doi: 10.4172/2165-8064.1000282
Copyright: © 2017 Mamatovich AZ. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Effective machining of modern day demands the new approach to designing of technology of machining which, allows considering all technological parameters of machining, as reduction of speed and reduction of giving depending on a material of an operating mode, features of the car, tools and material volume. Management of physical quantities of operations allows us to reach faster processes of machining when in comparison with old technologies of machining the current technology differs with high speed and also increases productivity. In manuscript showed energy effective method modeling and manufacturing of a new profile of a tooth of a saw.