The Influence of the Wet Processing Stages on Yarn Processability
El-Hadidy AM, El-Rys SM* and El-Hossiny A
Textile Engineering Department, Mansoura University, Egypt
- *Corresponding Author:
- El-Rys SM
Textile Engineering Department
Mansoura University, Egypt
E-mail: [email protected]
Received Date: September 06, 2015; Accepted Date: Septemeber 21, 2015; Published Date: Septemeber 27, 2015
Citation: El-Hadidy AM, El-Rys SM, El-Hossiny A (2015) The Influence of the Wet Processing Stages on Yarn Processability. J Textile Sci Eng 5:214. doi:10.4172/2165-8064.1000214
Copyright: © 2015 El-Hadidy AM, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
In this study, the influence of the wet processing stages, on cotton yarn process ability was investigated. The yarn samples were collected after every treatment and tested for kniteability efficiency. The total evaluation of the yarn properties was measured by using performance diagram. It was found that the highest processability index was occurred after mercerization conditions of 26°Be at temperature 19°C, vat dyeing and at temperature 19°C, reactive dyeing. While maximum processability index with reactive dyeing was occurred with mercerization condition of 28°Be` at temperature 24°C.