alexa Using Polymers as the Main Material in Engine Blocks an
ISSN: 2168-9873

Journal of Applied Mechanical Engineering
Open Access

OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)


Using Polymers as the Main Material in Engine Blocks and Components

Namata S*
M. Tech, Bhubaneswar Institute of Technology, Bhubaneswar, Odisha, India
Corresponding Author : Namata S, M. Tech
Bhubaneswar Institute of Technology
Bhubaneswar, Odisha, India
Tel: 9238428842
E-mail: [email protected]
Received April 14, 2015; Accepted October 29, 2015; Published  October 31, 2015
Citation: Namata S (2015) Using Polymers as the Main Material in Engine Blocks and Components. J Appl Mech Eng 4:182. doi:10.4172/2168-9873.1000182
Copyright: © 2015 Namata S. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Related article at Pubmed, Scholar Google


A substance which has a Molecular structure built up chiefly or completely from a large number of similar units bonded together, e.g. many synthetic organic materials used as plastics and resins. Plastics are very often used to quickly develop models in the automotive industry. A plastic prototype of a rocker arm can be created with 24 hours whereas a full metal model would take up to months and cost several times greater than then the plastic model. Rapid prototyping cuts the time factor in a manufacturing environment significantly and when time is cut so is the cost. The last and most important thing about plastics is that they are extremely recyclable. They are much easier to recycle than typical metals


Share This Page

Additional Info

Loading Please wait..
Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version