Verification of Phase Diagrams by Three-Dimension Computer ModelsLutsyk VI1,2* and Vorobâeva1
- *Corresponding Author:
- Lutsyk VI,
Institute of Physical Materials Science
Siberian Branch of Russian Academy of Sciences, Russia
E-mail: [email protected]
Received date: February 28, 2017; Accepted date: March 10, 2017; Published date: March 15, 2017
Citation: Lutsyk VI, Vorobâeva (2017) Verification of Phase Diagrams by Three-Dimension Computer Models. Mod Chem Appl 5:215. doi: 10.4172/2329-6798.1000215
Copyright: © 2017 Lutsyk VI, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Present paper is the survey of the works, dedicated to the elimination of contradictions in the publications, which describe the calculated and/or experimental results of investigations of the three-component systems phase diagrams. Special approach to the construction of phase diagrams in the form of their assembling from the surfaces and the phase regions into the three-dimensional (3D) computer model as the effective tool of the detection of the incorrect interpretation of the obtained experiment or of errors in the thermodynamic calculations of the phase diagrams fragments, caused by a deficiency in the initial information, is proposed. 3D computer models of Au-Ge-Sn, Au-Ge-Sb, Ag-Au-Bi, Ag-Sb-Sn, Au-Bi-Sb T-x-y diagram are considered.