Welding Applying for Increasing the Service Life of Cast Components of Metallurgical Equipment
- *Corresponding Author:
- Al-Quran FMF
Department of Mechanical Engineering
Al-Huson University College, Al-Balqa Applied University
PO Box 50, Al-Huson-Irbid, Jordan
Tel: +962 5 349 1111
E-mail: [email protected]
Received Date: February 27, 2017 Accepted Date: April 01, 2017 Published Date: April 05, 2017
Citation: Al-Quran FMF, Matarneh ME, Chigarev VV, Loza AV (2017) Welding Applying for Increasing the Service Life of Cast Components of Metallurgical Equipment. J Appl Mech Eng 6: 262. doi: 10.4172/2168-9873.1000262
Copyright: © 2017 Al-Quran FMF, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Cast connection joints used in metallurgy do not have enough resistance to high temperatures. Service life of such products can be increased by minor structure improvement with the use of welding technologies. In this article the possibility of large-scale product strengthening through welding is presented on the example of a slag pot carrier. The improvement of the pot will allow 3-5 times decreasing of the pot body deformation.