alexa A Comparative Study On Machining Parameters Effects According To Taguchi Design Method By Turning Nickel Based Super Alloys Inconel 600 And Hastelloy X | 19297
ISSN: 2168-9792

Journal of Aeronautics & Aerospace Engineering
Open Access

OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations
700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

2nd International Conference and Exhibition on Mechanical & Aerospace Engineering

Abdullah Altin and Muammer Nalnbant
ScientificTracks Abstracts: J Aeronaut Aerospace Eng
DOI: 10.4172/2168-9792.S1.002
Abstract
Nickel-based alloys constitute an important class of materials, which are used under demanding conditions of high corrosion resistance and high temperature strength. These characteristics together with their good ductility and easy of cold working make them generally very attractive for a wide variety of applications; nearly all of which exploit their corrosion resistance in atmospheric, salt water and various acid and alkaline media. Hastelloy X and Inconel 600 is a nickel-chromiumiron- molybdenum alloy which is developed for high temperature applications and it is derived from the strengthening particles, Ni2 (Mo, Cr), which is formed after the two-step age-hardening heat treatment process. With face-centered cubic (FCC), Ni- Cr-Mo-W alloys, named as Hastelloy, are used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, sensors and heat exchangers. In this talk, the effects of cutting tool coating material and cutting speed on cutting forces and surface roughness were investigated on Taguchi experimental design. Main cutting force, Fz is considered to be cutting force as a criterion. The effects of machining parameters were investigated using Taguchi L18 orthogonal array. Optimal cutting conditions were determined using the signal-to-noise (S/N) ratio which is calculated for average surface roughness and cutting force according to the ?the smaller is better? approach. Using results of analysis of variance (ANOVA) and signalto- noise (S/N) ratio, effects of parameters on both average surface roughness and cutting forces were statistically investigated. It has seen that while cutting tool (37.35 %) and feed rate (34.02%) has higher effect on cutting force in Inconel 600, the feed rate (65,99%) and cutting speed (11,14) has higher effect on cutting force in Hastelloy X. While feed rate (56.13%) and cutting speed (19.00%) has higher effect on average surface roughness ın Inconel 600, cutting tool (40,38 %), and feedrate (33,15%) has higher effect on average surface roughness in Hastelloy X.
Biography
Abdullah Altin is an Assistant Professor in Van Vocational of Higher School Mechanical and Metal Tachnology Department, from Van Yuzuncu Yil University in Turkey. His field of study is manufacturing and construction and has been working on CAD/CAM (computer aid design/computer aid manufacture), solid edge, master cam and production technics. He has been in Mechanical Engineering Department, Germany Zittau- Gorlitz University, for research and access to training in CAD/CAM by Erasmus Project. And he has also been invitted for teaching Staff Mobility By Erasmus Program, Mechanical Engineering Department, Nancy University of Lorraine , in May 2013 to France. Since 1996 he has been working in Yuzuncu Yil University as a Lecturer and then as an Assistant Professor.
image PDF   |   image HTML
 

Relevant Topics

Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2018-19
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

Agri & Aquaculture Journals

Dr. Krish

[email protected]

+1-702-714-7001Extn: 9040

Biochemistry Journals

Datta A

[email protected]

1-702-714-7001Extn: 9037

Business & Management Journals

Ronald

[email protected]

1-702-714-7001Extn: 9042

Chemistry Journals

Gabriel Shaw

[email protected]

1-702-714-7001Extn: 9040

Clinical Journals

Datta A

[email protected]

1-702-714-7001Extn: 9037

Engineering Journals

James Franklin

[email protected]

1-702-714-7001Extn: 9042

Food & Nutrition Journals

Katie Wilson

[email protected]

1-702-714-7001Extn: 9042

General Science

Andrea Jason

[email protected]

1-702-714-7001Extn: 9043

Genetics & Molecular Biology Journals

Anna Melissa

[email protected]

1-702-714-7001Extn: 9006

Immunology & Microbiology Journals

David Gorantl

[email protected]

1-702-714-7001Extn: 9014

Materials Science Journals

Rachle Green

[email protected]

1-702-714-7001Extn: 9039

Nursing & Health Care Journals

Stephanie Skinner

[email protected]

1-702-714-7001Extn: 9039

Medical Journals

Nimmi Anna

[email protected]

1-702-714-7001Extn: 9038

Neuroscience & Psychology Journals

Nathan T

[email protected]

1-702-714-7001Extn: 9041

Pharmaceutical Sciences Journals

Ann Jose

[email protected]

1-702-714-7001Extn: 9007

Social & Political Science Journals

Steve Harry

[email protected]

1-702-714-7001Extn: 9042

 
© 2008- 2018 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
Leave Your Message 24x7