alexa An Efficient, Practical And Environmental Friendly Method For The Preparation Of Rigid Polyurethane Foams: Synthesis, Characterization, And Comparison With Industrial Sample
ISSN: 2169-0022

Journal of Material Sciences & Engineering
Open Access

OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Share This Page

Additional Info

Loading
Loading Please wait..
 

3rd International Conference and Exhibition on Materials Science & Engineering
October 06-08, 2014 Hilton San Antonio Airport, USA

Elham Jaafarnia, Abolfazl Ghaderian, Amir Hossein Haghighi, Zizi Abdeen, Ali Boroomand and Faramarz Afshar Taromi
Posters: Material Sci Eng
DOI: 10.4172/2169-0022.S1.016
Abstract
Poly (ethylene terephthalate) waste bottles are recycled to preparing rigid polyurethane foams (RPUFs). The recycled method is glycolysis of Poly (ethylene terephthalate) waste bottles with diethylene glycol and propylene glycol as glycolysis agents in different glycol/polymer molar ratios. The structure and molecular weight of the glycolysis products were characterized using, FTIR, GPC spectroscopy analysis methods. Also, their hydroxyl number and viscosity were measured. The possibility of RPUFs fabrication using glycolysis products was investigated. The glycolysis products in GPC show a trimodal molecular weight distribution, as a proof for the presence of dimers, trimers and tetramers in the structure of recycling products. Glycolysis products are used for the fabrication of RPUFs with different densities. It was found that they have a proper range of densities were affected by the type and amount of glycolysis agent. The characteristics of foam were examined by FTIR, SEM, TGA, thermal conductivity coefficient and compressive strength. The properties of foams were compared with foam made with original polyol. The results revealed that the prepared foams have same properties compare the sample that is produced by original polyols.
Biography
She completed MSc in Nanoscience and Nanotechnology from Sharif University of Technology.
image PDF   |   image HTML
 

Relevant Topics

Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords