alexa Analysis Of The Strength Of The Saws To The Dynamic And Static Loads
ISSN: 2169-0022

Journal of Material Sciences & Engineering
Open Access

OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Share This Page

Additional Info

Loading
Loading Please wait..
 

3rd International Conference and Exhibition on Materials Science & Engineering
October 06-08, 2014 Hilton San Antonio Airport, USA

Saidnugmanov Umidjon Rustamovich and Azizov Shuhrat Mamatovich
Accepted Abstracts: Material Sci Eng
DOI: 10.4172/2169-0022.S1.017
Abstract
The results of the investigations show that the Saw wearout occurs due to the bending of the shaft under dynamic loads. The results of the investigations show that the high density of raw cotton leads higher damage to fibers during ginning. Assessment of different distances between the saws of gin and its effect to the quality of fiber; the results of the investigations shows that the Since reduction of the distance between saw from 22 mm to 14.59 mm brings about mechanically damaged filaments from 19.2 to 48%, interrupted filaments from 9.2 to 21% and thin skins with filament and fuzz from 1.66 to 3.14%. To solve this problem, we made an energy efficiency ginning machine. In old machines their saw cylinder included 130 saws, but there were much more problems described above. Because the distance between saws is 14.59 mm. As a result short cotton fiber increased in amount and it takes more time to gin. In conclusion, our new model of ginning machine enables energy efficient production, unlike old models of ginning machine, there are two saw cylinders in the new design of gin with similar parameters which are located in one worker chamber. When worker chambers consume cotton, it appears loosening and lengthened oval form. This allows reducing the density and accelerating the process of ginning and getting a qualitative fiber. As a result it provides stability and strength of shaft and increases durability of working parts
Biography
Saidnugmanov Umidjon Rustamovich has graduated Bachelor of Science in Banking and Finance at Management Development Institute of Singapore in Tashkent in 2013. He is a junior scientific researcher at International Relations Department of Namangan Engineering and Technological Institute. He has published 3 scientific articles.
image PDF   |   image HTML
 

Relevant Topics

Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords