Development of a WD-XRF analysis method of minor and trace elements in liquid petroleum products
World Congress on Petrochemistry and Chemical Engineering
November 18-20, 2013 Hilton San Antonio Airport, TX, USA

Maria Fernanda Gazulla Barreda

Accepted Abstracts: J Pet Environ Biotechnol

Abstract:

The developed methodology permits the analysis of minor and trace elements in liquid petroleum products, with varying oxygen content between 0 and 3.4 % and varying C/H ratio between 7 and 9, by wavelength-dispersive X-ray fluorescence (WD-XRF) spectrometry, necessary to determine the properties that indicate the function and performance of the product in service.The proposed methodology allows the analysis of a set of elements: Al, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Ni, P, Pb, S, Si, Ti, V and Zn, by WD-XRF in different materials in a huge range of concentrations, with high accuracy and in only 20 minutes. The method was fine-tuned by optimizing the measurement conditions and calculating the detection and quantification limits (1.4 mg?kg-1 for S and 0.5 mg?kg-1 for the rest of elements). The validation was carried out by using a series of reference materials and the uncertainty of the method was calculated according to the expression: , where U V R is the uncertainty of the certified value of the reference material, is the uncertainty of the measurement of the reference material, is the uncertainty of the measurement of the sample, and k is a coverage factor.Sulphur analysis was also performed by combustion and IR detection apart from WD-XRF and the results obtained by both techniques were compared. The matrix of the samples analyzed and the standards used was also analyzed by determining C, H, N and O

Biography :

Maria Fernanda Gazulla Barreda completed her Ph.D. on Chemistry (Chemical Engineering) in 2005 from Jaime I University of Castell?n (Spain). She is the head of the Area for the Analyses and Tests of the Instituto de Tecnolog?a Cer?mica (ITC), a research institute focused on spearheading technology innovation and design processes in the Spanish industry. She has published 65 papers in reputed journals, 2 books and 57 communications at conferences and symposia on different subjects. She has participated in more than 75 R&D and Technology and Consultancy conduced at ITC and given more than 30 conferences and courses about chemical characterization