alexa Development Of Brushless DC Motor Drive For Appliance Applications
ISSN: 2169-0316

Industrial Engineering & Management
Open Access

OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Share This Page

Additional Info

Loading Please wait..

International Summit on Industrial Engineering
December 08-10, 2014 DoubleTree by Hilton Hotel San Francisco Airport, USA

Jun-Hyuck Choi, Joon Sung Park and Jin-Hong Kim
Posters: Ind Eng Manage
DOI: 10.4172/2169-0316.S1.005
In order to prevent global warming and save resources, there has been a pressing need in recent years to improve the efficiency of home appliance. Appliance applications such as washers, dryers, air conditioners, and refrigerators, have long been users of conventional induction motor and DC motor for operating pumps, compressors, blowers, fans and agitators as common examples. To meet the increasing demand of energy saving, the induction motor and DC motor in home appliance applications are rapidly being replaced with brushless DC motor. However, the BLDC motor needs more complex motor drive comparing with the DC motor and induction motor drive. One of the complicated points is current delay problem in high speed which is induced by impedance of inductance at high frequency. For this reason, it is difficult to operate in a wide range of the speed, particularly such as high speed operation. In order to solve this problem, lead angle injection has been utilized. With lead angle adjustment, phase current in the motor winding is allowed to be built up before the back-EMF reaches any significant level. Also, the current waveform is closed to rectangular waveform and operates BLDC motor effectively over a wide range the switches must be turned on in advance of the rising back-EMF region so as to allow time for the current to be built up. This paper deals primarily with the design aspects of the brushless DC motor drive for appliance applications. Experimental results from laboratory prototype are presented to validate the feasibility.
Jun-Hyuk Choi received his MS and PhD degrees in Electrical and Electronic engineering from Sung Kyun Kwan University, Suwon, Korea, in 2003 and 2014, respectively. Since 2003, he has been with the Intelligent Mechatronics Research Center of Korea Electronics Technology Institute (KETI) in Bucheon, Korea. He is currently the Team manager of the Power Conversion & Motor Control Team of KETI. His research interests are power electronics and motor control.
image PDF   |   image HTML

Relevant Topics

Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version