Reach Us +447482877761
Effect Of Al3+/clay Ratio On C3H6-SCR Over Iron Catalysts Supported On Aluminum Pillared Montmorillonite (FE-AL-PILC) | 96266
ISSN: 2380-2391

Journal of Environmental Analytical Chemistry
Open Access

Our Group organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations
700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Effect of Al3+/clay ratio on C3H6-SCR over iron catalysts supported on aluminum pillared montmorillonite (FE-AL-PILC)

9th World Congress on Green Chemistry and Technology

Yaxin Su,Wenyan Qian and Wenyi Deng

Donghua University, China

ScientificTracks Abstracts: J Environ Anal Chem

DOI: 10.4172/2380-2391-C2-005

Iron based catalysts supported on aluminum pillared montmorillonite (Fe-Al- PILC) were prepared. The methods including XRD, H2-TPR, Py-FTIR, Uv-Vis spectroscopy, ICP, N2 adsorption-desorption, etc. were used to characterize the basic physical and chemical properties of the catalysts. The characteristics of selective catalytic reduction of NO by propylene on the catalyst surface were studied experimentally in a fixed-bed reactor, and the effect of the Al3+/clay ratios on the physicochemical properties of the catalyst and the SCR-C3H6 was investigated. The results show that 9Fe/Al-PILC has higher SCR-C3H6 denitrification performance, e.g., 100% of NO conversion to N2 was tested over 400°C. The Al3+/clay ratio plays more important role on NO conversion than the calcination temperature of the carrier. According to the Al3+/clay ratios, the order of catalytic activity is 9Fe/ Al-PILC-10>9Fe/Al-PILC-20>9Fe/Al-PILC-5>9Fe/clay>9Fe/Al-PILC-40. Al3+ increased the specific surface area of the montmorillonite dramatically, and the catalyst had micropores and mesoporous structures. When the Al3+/clay ratio was 10 mmol/g of the pillared montmorillonite had the best physicochemical property. In the Fe/Al-PILC catalysts, the iron oxides are highly dispersed on the surface of the support. H2-TPR shows that the reduction of Fe2O3 phase determines the SCR activity of the catalyst. With the increase of Al3+/clay ratio, the reducing temperature of the reducing process Fe3O4???Fe gradually increases. UV-Vis results showed that Al3+ increased the oligomer FexOy, and the activity of the catalyst was positively correlated with the oligomer FexOy. Py-IR results showed that both Lewis acid and Bronsted acid were favorable for the selective catalytic reduction of NO. The 9Fe/Al-PILC-10 catalyst had the best activity, which was related to its higher Brønsted acid content.

Yaxin Su has received his PhD in Power Engineering and Thermophysics with a focus on combustion from Zhejiang University, China, in 2000. He worked in the Department of Chemical Engineering, University of Mississippi, USA as a Visiting Professor during 2006-2007. He is currently a Professor in the School of Environmental Science and Engineering, Donghua University, China. He has been involved in heat transfer, gas-solid suspension flow and separation, thermochemical conversion of solid fuels, such as pyrolysis and combustion of coal, biomass and waste sludge, pollutant emission control, such as NOx reduction, CO2 capture, etc. He has published three academic books and two textbooks, more than 100 journal articles and 50 international conference papers.

E-mail: [email protected]