alexa Recycle Pipe Location Upstream Of Compressor Inlet To Avoid Flow-induced Vibration
ISSN: 2168-9792

Journal of Aeronautics & Aerospace Engineering
Open Access

OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Share This Page

Additional Info

Loading
Loading Please wait..
 

2nd International Conference and Exhibition on Mechanical & Aerospace Engineering
September 08-10, 2014 Philadelphia, USA

Andrew Hunter and Srinivas Yada
ScientificTracks Abstracts: J Aeronaut Aerospace Eng
DOI: 10.4172/2168-9792.S1.002
Abstract
Flow induced-vibration can occur in a centrifugal compressor particularly when operating on full recycle mode and 100% of the discharge flow is re-circulated through the compressor inlet. Typically the recycle flow is introduced perpendicularly in the main inlet pipe, resulting in significant radial and circumferential flow distortion at the compressor inlet. It was analytically determined that the flow uniformity can be significantly reduced by locating the recycle pipe further upstream of the compressor inlet. The studies comprised recycle pipe locations two (2D) to five (5D) inlet pipe diameters upstream of the compressor inlet. The ratio of peak to mid-span axial velocities decreased from 24:1 to 2:1 from the 2D to the 5D cases.
Biography
Andrew Hunter has over 20 year?s experience in the turbo machinery field. Currently he is responsible for the Aerodynamic Design Group at Atlas Copco, Comptec. Prior to this he was an Aerodynamic Design Engineer at General Electric Energy Large Steam Turbine Department and an Adjunct Professor of Mechanical Engineering at Rensselaer Polytechnic Institute. He received his PhD in Mechanical Engineering at RPI and MSc in Mechanical Engineering from Union College. His areas of expertise include aero/thermodynamics of axial and radial turbo machinery. He is the author of 8 publications and one US patent; he is a senior member of the ASME and AIAA. He is a co-organizer of the 2014 IGTI COMM 22: Heat Transfer in Steam turbines (with steam).
image PDF   |   image HTML
 
Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords