alexa Synthesis And Structural Characterization Of Nanocrystalline Ti-Al Intermetallic Compound Prepared By Mechanical Alloying
ISSN: 2169-0022

Journal of Material Sciences & Engineering
Open Access

OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Share This Page

Additional Info

Loading
Loading Please wait..
 

3rd International Conference and Exhibition on Materials Science & Engineering
October 06-08, 2014 Hilton San Antonio Airport, USA

K Taibi, S Taane and M Azzaz
Posters: Material Sci Eng
DOI: 10.4172/2169-0022.S1.016
Abstract
Intermetallic alloys are a class of structural materials for a variety of applications: space, automotive, aerospace etc. These compounds alloys based on Ti-Al are considered very promising for high temperature applications. They are compared with conventional alloys several advantages: higher modulus, lower density, better mechanical strength and greater resistance to oxidation. These alloys also retain good dimensional stability and greater thermal conductivity. However, their low ductility at an ambient temperature has been the major limitation for the use of these materials. The improvement of these properties is possible by developing new microstructures: Amorphous, nanostructure, quasicrystalline and nanostructures by addition of a third element. In this study we developed and studied, a base intermetallic alloys Ti-Al to which we added the Tantalum (Ta) element with the aim of producing nanostructured intermetallic alloys from elemental powders by means of mechanical alloying (MA). The phase evolution and microstructural changes of the powders during mechanical alloying were investigated as a function of milling time, by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive Spectroscopy (EDS).
image PDF   |   image HTML
 

Relevant Topics

Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords