GET THE APP

Unmanned Aerial System (UAS) engine research at US Army research | 5107
Journal of Aeronautics & Aerospace Engineering

Journal of Aeronautics & Aerospace Engineering
Open Access

ISSN: 2168-9792

+44-20-4587-4809

Unmanned Aerial System (UAS) engine research at US Army research laboratory


3rd International Conference and Exhibition on Mechanical & Aerospace Engineering

October 05-07, 2015 San Francisco, USA

Chol-Bum ��?Mike��? Kweon

US Army Research Laboratory, USA

Scientific Tracks Abstracts: J Aeronaut Aerospace Eng

Abstract :

Demand for Unmanned Aerial Systems (UAS) aircrafts is projected to increase dramatically in the near future. U.S. Army has four major UAS aircrafts with varying propulsion technologies from battery, rotary, to diesel engines. Selection of the technologies is currently based on the power range: small UAS powered with battery, medium UAS with aviation gasoline powered rotary engine (28 kW), and large UAS with Jet fuel powered diesel engine (119 kW). Each technology has its own issues with a common issue of reliability. The major issue of the battery-powered UAS aircraft is its weight and flight time with a huge burden on soldiers who need to carry the battery system. Rotary engine technology has its inherent seal issues due to its large contact areas, and it is difficult to efficiently burn heavy fuels due to its inherent low compression ratio. The diesel engine version is the most reliable but it still has significant reliability issues. One of the major issues may be induced due to large fuel property variation of Jet fuels. For instance, Cetane number of Jet fuels varies from as low as 30 to over 50 in the battlefields which will have significant impact on ignition and combustion processes of UAS aircrafts at high altitudes. Abnormal combustion could lead to detonation which could damage the engines and lead to loss of aircrafts. In this presentation, the effects of fuel properties on UAS engine combustion will be presented. In addition, spray and combustion processes of different fuel properties will be presented both in experiment and 3D CFD.

Biography :

Chol-Bum ‘Mike’ Kweon completed his PhD from University of Wisconsin-Madison in 2002. He worked for Gas Technology Institute, General Motors R&D, General Motors Powertrain, and Delphi Advanced Powertrain. He is the Team Leader of Power Generation Research Team at the US Army Research Laboratory. He has published more than 60 technical and journal papers and 31 intellectual properties. He teaches a graduate-level combustion course at Johns Hopkins University and an undergraduate Internal Combustion Engine class at University of Maryland-College Park. He also serves as a Technical POC and Committee Member in multiple DoD organizations and technical communities.

Email: chol-bum.m.kweon2.civ@mail.mil

Top