Author(s): Peternel IT, Koprivanac N, Bozi AM, Kusi HM
Abstract Share this page
Abstract In this study advanced oxidation processes (AOPs), UV/TiO(2), UV/ZnO and photo-Fenton, were applied in order to degrade C.I. Reactive Red 45 (RR45) dye in aqueous solution. The effects of key operating parameters, such as initial pH, catalyst and hydrogen peroxide dosage as well as the effect of initial dye concentration on decolorization and mineralization extents were studied. Primary objective was to determine the optimal conditions for each of the processes. The influence of added zeolite on the process efficiency was also studied. UV/vis spectrophotometric and total organic carbon (TOC) measurements were performed for determination of decolorization and mineralization extents. It has been found that photo-Fenton process was the most efficient with 74.2\% TOC removal and complete color removal achieved after a 1h treatment.
This article was published in J Hazard Mater
and referenced in Journal of Chemical Engineering & Process Technology