alexa Design and application of a control system for DC motors over power line


International Journal of Sensor Networks and Data Communications

Author(s): Alperen Mustafa Colak, Ilhan Garip, Sevki Demirbas

Abstract Share this page

Communicating high frequency control signals over a power lines is well known and getting popular day by day. This technique is known as power line communication (PLC) and mostly used to control the loads in short distance. In this study, authors present to control a DC motor over a power line. For this purpose, a transmitter and receiver have been used on the power line. High frequency control signals are sent by the transmitter and received by the receiver at other side of the line. In this way, DC motors is run and stop. This whole system is controlled by a microprocessor PIC16F877A at 33 kHz. Experimental results show that the proposed system is successful and can be applicable for controlling of other loads.

This article was published in Power Electronics and Motion Control Conference and Exposition (PEMC) and referenced in International Journal of Sensor Networks and Data Communications

Relevant Expert PPTs

Relevant Speaker PPTs

Relevant Topics

Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version