alexa Development and validation of a high-performance liquid chromatographic method for the determination of buspirone in pharmaceutical preparations.
Pharmaceutical Sciences

Pharmaceutical Sciences

Pharmaceutica Analytica Acta

Author(s): Zaxariou M, Panderi I

Abstract Share this page

Abstract A stability indicating, reversed-phase high-performance liquid chromatographic method was developed and validated for the determination of buspirone (Bsp) in pharmaceutical dosage forms. The use of a semi-micro XTerra MS C18 (150 mm x 3.0 mm i.d., 5 microm particle size) analytical column, results in substantial reduction in solvent consumption and increased sensitivity. The mobile phase consisted of a mixture of 0.010 M ammonium acetate (pH 4.0) and methanol (55:45, v/v), pumped at a flow rate 0.30 ml min-1. The UV detector was operated at 245 nm. The retention times for lidocaine (Ldc), which was used as internal standard, and buspirone were 4.57 and 7.72 min, respectively. The calibration graph was ranged from 1.00 to 5.00 microg ml-1, while detection and quantitation limits were found to be 0.22 and 0.67 microg ml-1, respectively. The intra- and inter-day relative standard deviation (\% R.S.D.) values were less than 1.94\%, while the relative percentage error (\% Er) was less than 4.0\% (n = 5). The method was applied to the quality control of commercial tablets and content uniformity test and proved to be suitable for rapid and reliable quality control. This article was published in J Pharm Biomed Anal and referenced in Pharmaceutica Analytica Acta

Relevant Expert PPTs

Relevant Speaker PPTs

Recommended Conferences

Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version