alexa Electrochemical generation of aluminum sorbent for fluoride adsorption.
Chemical Engineering

Chemical Engineering

Journal of Analytical & Bioanalytical Techniques

Author(s): Yang CY, Dluhy R

Abstract Share this page

Abstract Aluminum sorbent (Al-sorbent) was produced in a parallel-plate electrochemical reactor by anodic dissolution of aluminum electrodes in a dilute sodium chloride (NaCl) aqueous solution. The NaCl in the solution effectively reduced the power consumption and promoted the sorbent generation by depasivating the aluminum-water electrochemical system. The freshly generated Al-sorbent was able to reduce fluoride concentration from 16 to 2 mg/l in 2 min. The final concentration was further reduced to 0.1 mg/l by partial neutralization of the mixture to pH 6.3. The sorbent generation and fluoride adsorption was integrated into a single electrochemical reactor. The system was able to reduce the fluoride concentration from 16 to 6 mg/l in 2 min of treatment and to about 2 mg/l in 4 min. The effluent from the electrochemical system needs pH adjustment to bring the fluoride concentration down to less than 1 mg/l.
This article was published in J Hazard Mater and referenced in Journal of Analytical & Bioanalytical Techniques

Relevant Expert PPTs

Relevant Speaker PPTs

Recommended Conferences

Relevant Topics

Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version