Author(s): Kafle GK, Kim SH, Sung KI
Abstract Share this page
Abstract Fish waste (FW) obtained from a fish processor was ensiled for biogas production. The FW silages were prepared by mixing FW with bread waste (BW) and brewery grain waste (BGW), and the quality of the prepared silages were evaluated. The biogas potentials of BW, BGW, three different types of FW, and FW silages were measured. A first-order kinetic model and the modified Gompertz model were also used to predict methane yield. The biogas and methane yield for FW silages after 96 days was calculated to be 671-763 mL/g VS and 441-482 mL/g VS, respectively. There were smaller differences between measured and predicted methane yield for FW silages when using a modified Gompertz model (1.1-4.3\%) than when using a first-order kinetic model (22.5-32.4\%). The critical HRTs and technical digestion times (T(80-90)) for the FW silages were calculated to be 21.0-23.8 days and 40.5-52.8 days, respectively. Copyright © 2012 Elsevier Ltd. All rights reserved.
This article was published in Bioresour Technol
and referenced in International Journal of Waste Resources