alexa Health Monitoring of Civil Infrastructures Using Wireless Sensor Networks


Journal of Telecommunications System & Management

Author(s): Sukun Kim, Shamim Pakzad, David Culler, James Demmel, Gregory Fenves

Abstract Share this page

A Wireless Sensor Network (WSN) for Structural Health Monitoring (SHM) is designed, implemented, deployed and tested on the 4200 ft long main span and the south tower of the Golden Gate Bridge (GGB). Ambient structural vibrations are reliably measured at a low cost and without interfering with the operation of the bridge. Requirements that SHM imposes on WSN are identified and new solutions to meet these requirements are proposed and implemented. In the GGB deployment, 64 nodes are distributed over the main span and the tower, collecting ambient vibrations synchronously at 1 kHz rate, with less than 10 mus jitter, and with an accuracy of 30 muG. The sampled data is collected reliably over a 46-hop network, with a bandwidth of 441 B/s at the 46th hop. The collected data agrees with theoretical models and previous studies of the bridge. The deployment is the largest WSN for SHM.

This article was published in IEEE and referenced in Journal of Telecommunications System & Management

Relevant Expert PPTs

Relevant Topics

Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version