alexa Highly sensitive and selective amperometric nitrite sensor based on electrochemically activated graphite modified screen printed carbon electrode
Toxicology

Toxicology

Toxicology: Open Access

Author(s): Selvakumar Palanisamy, Chelladurai Karuppiah, ShenMing Chen, Prakash Periakaruppan

Abstract Share this page

A novel and sensitive amperometric nitrite sensor has been developed using electrochemically activated graphite (EAG) modified screen printed carbon electrode (SPCE) for the first time. The enhanced oxidation peak current (Ipa) with lower oxidation overpotential (Epa) of nitrite is observed at EAG modified SPCE than that of electrochemically activated SPCE and graphite/SPCE. Under optimum conditions, the linear response of nitrite is found from 0.1 μM to 16.4 mM with a lower limit of detection of 38 nM. The sensitivity is calculated as 0.126 μA μM−1 cm−2. The EAG modified SPCE exhibits its high selectivity in the presence of common ions and biological co-active interfering species. In addition, the fabricated nitrite sensor shows a good repeatability, reproducibility and long term stability along with excellent practicality.

This article was published in Journal of Electroanalytical Chemistry and referenced in Toxicology: Open Access

Relevant Expert PPTs

Relevant Speaker PPTs

Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords