alexa Integration of laser surface digitizing with CAD CAM techniques for developing facial prostheses. Part 2: Development of molding techniques for casting prosthetic parts.


Reconstructive Surgery & Anaplastology

Author(s): Cheah CM, Chua CK, Tan KH

Abstract Share this page

Abstract PURPOSE: This article presents a novel manufacturing approach that integrates laser surface digitizing/scanning and computer-aided design and manufacturing (CAD/CAM) to achieve automated fabrication of spatially and anatomically accurate extraoral facial prostheses. MATERIALS AND METHODS: Contrary to the approach in part 1 for fabricating positive replicas of prostheses, the approaches presented here are focused on designing and producing negative molds of the final prostheses using CAD, rapid prototyping, and rapid tooling techniques. The molds were applied directly to cast the final prostheses, thereby eliminating conventional flasking and investing procedures. RESULTS: Three different facial prostheses were produced to evaluate the proposed approach for prosthesis production. The advantages of this alternative manufacturing approach over the approach presented in part 1 and conventional techniques are discussed. The limitations encountered with the integrated manufacturing system are highlighted. CONCLUSION: With the new techniques, reduced patient discomfort, minimal dependence on the artistic skills of the prosthetist, and short turnaround times for prosthesis production can be expected.
This article was published in Int J Prosthodont and referenced in Reconstructive Surgery & Anaplastology

Relevant Expert PPTs

Relevant Speaker PPTs

Recommended Conferences

Relevant Topics

Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version