Author(s): da Silva AS, Inoue H, Endo T, Yano S, Bon EP, da Silva AS, Inoue H, Endo T, Yano S, Bon EP
Abstract Share this page
Abstract The effectiveness of ball milling (BM) and wet disk milling (WDM) on treating sugarcane bagasse and straw were compared. Pretreated materials were characterized by wide angle X-ray diffraction analysis, particle-size distribution and scanning electron microscopy and the effectiveness of pretreatments was evaluated by enzymatic hydrolysis and fermentation. Glucose and xylose hydrolysis yields at optimum conditions for BM-treated bagasse and straw were 78.7\% and 72.1\% and 77.6\% and 56.8\%, respectively. Maximum glucose and xylose yields for bagasse and straw using WDM were 49.3\% and 36.7\% and 68.0\% and 44.9\%, respectively. BM improved the enzymatic hydrolysis by decreasing the crystallinity, while the defibrillation effect observed for WDM samples seems to have favored enzymatic conversion. Bagasse and straw BM hydrolysates were fermented by Saccharomyces cerevisiae strains. Ethanol yields from total fermentable sugars using a C6-fermenting strain reached 89.8\% and 91.8\% for bagasse and straw hydrolysates, respectively, and 82\% and 78\% when using a C6/C5 fermenting strain. Copyright © 2010 Elsevier Ltd. All rights reserved.
This article was published in Bioresour Technol
and referenced in Journal of Bioprocessing & Biotechniques