alexa Novel approach for PLC impulsive noise modelling
Engineering

Engineering

International Journal of Sensor Networks and Data Communications

Author(s): Mohamed Tlich, Hassina Chaouche, Ahmed Zeddam, Pascal Pagani

Abstract Share this page

The electrical appliances shared with PLC modems in the same powerline network generate noises. Among them, impulsive noises are the main source of interference resulting in signal distortions and bit errors during data transmission. Many impulsive noise models were proposed in the literature. They share the same impulsive noise definition: “unpredictable noises measured at the receiver side”. This definition leads to the modelling of thousands of impulsive noises whose plurality would very likely come from the diversity of paths that the original impulsive noise took. In this paper, an innovative modelling approach is applied to impulsive noises which are henceforth studied directly at their sources. Noise at the receiver is considered as the noise model at the source filtered by the powerline channel. Effective in-device sources of impulsive noises are identified and classified into six classes, from which representative noises are proposed. Based on impulsive modelling at source, a receiver side model is finally proposed.

This article was published in Power Line Communications and Its Applications and referenced in International Journal of Sensor Networks and Data Communications

Relevant Expert PPTs

Relevant Speaker PPTs

Relevant Topics

Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords