alexa One-step bleaching process for cotton fabrics using activated hydrogen peroxide.
Engineering

Engineering

Journal of Civil & Environmental Engineering

Author(s): AbdelHalim ES, AlDeyab SS, AbdelHalim ES, AlDeyab SS

Abstract Share this page

Abstract Cotton fabric was bleached in a simple and economic process using a bleaching system composed of hydrogen peroxide activated with thiourea. Different bleaching trials were carried out with varying hydrogen peroxide and thiourea concentrations, as well as the bleaching medium temperature. The obtained results reveal that bleached cotton fabric with satisfactory whiteness index and reasonable tensile strength can be obtained by treating the fabric at 90 °C in a bleaching bath containing 6 g/l hydrogen peroxide, 1.5 g/l thiourea and 1 g/l non-ionic wetting agent using a material to liquor ratio of 1:20. These optimum conditions lead to completion of the bleaching process in a reasonable duration of 1h. Lower concentrations of the activator thiourea were found to prolong the bleaching duration without getting satisfactory whiteness index. Higher concentrations of the activator were found to cause early termination of the oxidizing species leading to bad whiteness index. Copyright © 2012 Elsevier Ltd. All rights reserved. This article was published in Carbohydr Polym and referenced in Journal of Civil & Environmental Engineering

Relevant Expert PPTs

Relevant Speaker PPTs

Recommended Conferences

Relevant Topics

Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords