alexa Optimization of electrochemical treatment of industrial paint wastewater with response surface methodology.
Engineering

Engineering

Journal of Civil & Environmental Engineering

Author(s): Krbahti BK, Akta N, Tanyola A

Abstract Share this page

Abstract The electrochemical oxidation of water-based paint wastewater was investigated batch-wise in the presence of NaCl electrolyte with carbon electrodes for the first time in literature. The electrochemical treatment conditions were optimized using response surface methodology where potential difference, reaction temperature and electrolyte concentration were to be minimized while chemical oxygen demand (COD), color and turbidity removal percents and initial COD removal rate were maximized at 100\% pollution load. The optimum conditions were satisfied at 35 g/L external electrolyte concentration, 30 degrees C reaction temperature and 8 V potential difference (64.37 mA/cm(2) current density) realizing 51.8\% COD and complete color and turbidity removals, and 3010.74 mg/Lh initial COD removal rate. According to these results, the electrochemical method could be a strong alterative to conventional physicochemical methods for the treatment of water-based paint wastewater. This article was published in J Hazard Mater and referenced in Journal of Civil & Environmental Engineering

Relevant Expert PPTs

Relevant Speaker PPTs

Recommended Conferences

Relevant Topics

Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords