alexa Polymer micro-fiber Bragg grating.
Engineering

Engineering

Journal of Biosensors & Bioelectronics

Author(s): Rajan G, Noor MY, Lovell NH, Ambikaizrajah E, Farrell G,

Abstract Share this page

Abstract Polymer micro-fibers with inscribed Bragg gratings are reported in this Letter. Starting with a single-mode polymer optical fiber and implementing a two-stage tapering process, a 16 μm diameter micro-fiber is fabricated and a Bragg grating is inscribed in it that exhibits a peak reflected wavelength circa 1530 nm. The growth dynamics of the polymer micro-fiber Bragg grating are also observed and analyzed. A maximum reflectivity of 5\% is obtained after an exposure time of 3 min to a 50 mW power He-Cd laser of 325 nm wavelength. The temperature and strain characterization results of the micro-fiber Bragg grating with different diameters are also presented. Such polymer micro-fiber Bragg gratings can be used as sensors for high-sensitivity measurements in a number of application areas.
This article was published in Opt Lett and referenced in Journal of Biosensors & Bioelectronics

Relevant Expert PPTs

Relevant Speaker PPTs

Recommended Conferences

Relevant Topics

Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords