alexa Power Measurement by Output-Current Integration in Series Resonant Inverters
Engineering

Engineering

Journal of Electrical & Electronic Systems

Author(s): Jos I Artigas, Isidro Urriza, Jess Acero, Luis A Barragan, Denis Navarro, Jos M Burdio

Abstract Share this page

In many applications, efficiency and service quality are improved with an appropriate power control. This paper focuses on a power-measurement method designed to deal with medium/high frequencies (tens to hundreds of kilohertz). It requires a previous knowledge of application and exploits some characteristics of the power topology and control, in this case, a full-bridge series resonant inverter. It is a new method based on a low-cost analog circuit that integrates the high-frequency load current, in order to reduce the computational complexity of measuring power. Harmonic analysis is carried out to determine the A/D converter requirements, and the theoretical results are verified using a digital-signal-processor (DSP)-based experimental setup. The power measurement may be implemented on the microcontroller or low-performance DSP used to control the power stage, with an error below of 2% independent of the load and mains variations.

This article was published in IEEE Transactions on Industrial Electronics and referenced in Journal of Electrical & Electronic Systems

Relevant Expert PPTs

Relevant Speaker PPTs

Recommended Conferences

Relevant Topics

Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords