alexa Removal of chromium (III) by using coal as adsorbent.
Environmental Sciences

Environmental Sciences

Hydrology: Current Research

Author(s): Anwar J, Shafique U, Salman M, WaheeduzZaman, Anwar S,

Abstract Share this page

Abstract The adsorption of Cr(III) by two different coal varieties from Lakhra and Thar coalfields (Pakistan) have been studied in batch mode. The effect of adsorbent dose, pH, contact time and agitation speed on the adsorption of Cr(III) by both the coals were investigated. Adsorption equilibrium was achieved in 40-50 min. The Langmuir, Freundlich and Temkin adsorption isotherms were used to elucidate the observed sorption phenomena. The maximum Cr(III) removal was 2.61 mg of Cr(III) per gram of LC (Lakhra coal) and 2.55 mg of Cr(III) per gram of TC (Thar coal) as evaluated from Langmuir isotherm. The heat of sorption was in the range 3.75-3.87 kJ/mol as evaluated from Temkin isotherm. Best results were obtained at pH>5. It is proposed that low rank coals of Pakistan can be used for removal of toxic metals like Cr(III) from industrial effluents/waste waters. This article was published in J Hazard Mater and referenced in Hydrology: Current Research

Relevant Expert PPTs

Relevant Speaker PPTs

Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version