alexa Removal of Congo red using activated carbon and its regeneration.
Materials Science

Materials Science

Research & Reviews: Journal of Material Sciences

Author(s): MK Purkait, A Maiti, S DasGupta, S De

Abstract Share this page

Activated carbon is used for the removal of colored toxic congo red dye. The effects of different operating conditions like, initial dye concentration, contact time, pH and temperature are studied for adsorption of congo red by a known amount of activated carbon (1.0 g/L) under stirred batch condition. The zero point of charge of the activated carbon is found about 6.6. About 90% dye is removed for initial concentration of 50 and 100 mg/L, it is about 80% at pH 7.0. Maximum adsorption (about 100%) of dye is observed at pH 2.0 for the concentration range studied here. Freundlich isotherm is found to fit the equilibrium data more adequately. Pseudo second order kinetic model explain successfully the kinetic data. The surfactant enhanced carbon regeneration (SECR) technique using both cationic and anionic surfactants is adopted for the regeneration of spent carbon by desorbing the dye. A kinetic model for dye desorption from the commercial activated carbon (CAC) is also proposed. Anionic surfactants show better performance than the cationic ones. Efficiency of dye desorption using surfactants is also compared with the desorption using pH change. Keywords

This article was published in J Hazard Mater and referenced in Research & Reviews: Journal of Material Sciences

Relevant Expert PPTs

Relevant Speaker PPTs

Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords