Author(s): Wang XS, Chen LF, Li FY, Chen KL, Wan WY,
Abstract Share this page
Abstract The removal of Cr (VI) from aqueous solutions using black carbon (BC) isolated from the burning residues of wheat straw was investigated as a function of pH, contact time, reaction temperature, supporting electrolyte concentration and analytical initial Cr (VI) concentration in batch studies. The effect of surface properties on the adsorption behavior of Cr (VI) was investigated with scanning electron microscope (SEM) equipped with the energy dispersive X-ray spectroscope (EDS) and Fourier transform-infrared (FTIR) spectroscopy. The removal mechanism of Cr (VI) onto the BC was investigated and the result showed that the adsorption reaction consumed a large amount of protons along the reduction of Cr (VI) to Cr (III). The oxidation of the BC took place concurrently to the chromium reduction and led to the formation of hydroxyl and carboxyl functions. An initial solution pH of 1.0 was most favorable for Cr (VI) removal. The adsorption process followed the pseudo-second order equation and Freundlich isotherm very well. The Cr (VI) adsorption was temperature-dependent and almost independent on the sodium chloride concentrations. The maximum adsorption capacity for Cr (VI) was found at 21.34 mg/g in an acidic medium, which is comparable to other low-cost adsorbents. (c) 2009 Elsevier B.V. All rights reserved.
This article was published in J Hazard Mater
and referenced in Journal of Environmental Analytical Chemistry