alexa Spectrophotometric determination of dapsone in pharmaceutical products using sodium 1,2-naphthoquinone-4-sulfonic as the chromogenic reagent.
Chemical Engineering

Chemical Engineering

Journal of Analytical & Bioanalytical Techniques

Author(s): Wang HY, Xu LX, Xiao Y, Han J

Abstract Share this page

Abstract Spectrophotometric determination of dapsone is described. The dapsone reacts with sodium 1,2-naphthoquinone-4-sulfonic in pH 6.98 buffer solution to form a salmon pink compound, and its maximum absorption wavelength is at 525 nm, epsilon525=3.68 x 10(4) l mol(-1) cm(-1). The absorbance of dapsone from 0.40 to 10 microg ml(-1) obeys Beer's law. The linear regression equation of the calibration graph is C=0.2334 A + 0.01288, with a linear regression correlation coefficient of 0.9998, the detection limit is 0.24 microg ml(-1), and recovery is from 99.2 to 102.4\%. Effects of pH, surfactant, organic solvents, foreign ions, and standing time on the determination of dapsone have been examined. This method is simple and can be used for the determination of dapsone in injection solution of dapsone. The results obtained by this method agreed with those by the official method (dead-stop titration method [The Chinese Pharmacopoeia, Pharmacopoeia Commission, Ministry of Health, vol. 2, fifth ed., PRC Chemical Industry Press, Beijing, 2000, p.720]). This article was published in Spectrochim Acta A Mol Biomol Spectrosc and referenced in Journal of Analytical & Bioanalytical Techniques

Relevant Expert PPTs

Relevant Speaker PPTs

Recommended Conferences

Relevant Topics

Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords