Author(s): Yu MF, Files BS, Arepalli S, Ruoff RS
Abstract Share this page
Abstract The mechanical response of 15 single wall carbon nanotube (SWCNT) ropes under tensile load was measured. For 8 of these ropes strain data were obtained and they broke at strain values of 5.3\% or lower. The force-strain data are well fit by a model that assumes the load is carried by the SWCNTs on the perimeter of each rope. This model provides an average breaking strength of SWCNTs on the perimeter of each rope; the 15 values range from 13 to 52 GPa (mean 30 GPa). Based on the same model the 8 average Young's modulus values determined range from 320 to 1470 GPa (mean 1002 GPa).
This article was published in Phys Rev Lett
and referenced in Journal of Applied Mechanical Engineering